IP Gateway Showing different on some devices except of default gateway
IP Gateway Showing different on some devices except of default gateway
Hello TP-Link Community
Hope you are fine,
When i connect the tp link router with WAN cable to my internet it shows different i gateways on some different devices
My default ip gateway is 0.50 but it shows 30.1 on some devices and on some devices which is connected to automatic DHCP it shows 30.4 &30. 20 series
but my default gateway is 0.50
kindly help me solve this issue i cannot understand why the default gateway is not showing on some devices
Attached is the screenshot the final picture is my default gateway IP address the first two picture show the wrong
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
What make and model are Switch0 and Switch1 ? Do you have any DHCP server configuration on the Switch0 ?
- Copy Link
- Report Inappropriate Content
All switches are set on dhcp and server 0 set an static ip from c80 and also from c6
- Copy Link
- Report Inappropriate Content
If your C80 is with LAN IP address 192.168.0.50 then its DHCP server gives IP addresses in the 192.168.0.0/24 subnet.
The reason for receiving LAN IP addresses in 192.168.30.0/24 subnet on some of your client devices is an active DHCP server in this subnet - a device with LAN IP address 192.168.30.1.
Judging by your network diagram and the information you've provided so far, that's most probably one of your switches (Switch0 or Switch1).
- Copy Link
- Report Inappropriate Content
you mean one of my switches gives ip 192.168.30.00/25 subnet but when I change the router c80 with Huawei router it works fine and dont give 192.168.30.0/subnet it give 192.168.0.00 /subnet iP's
and 1 more thing when i connect c80 it also disturb the internet of C6 Router
- Copy Link
- Report Inappropriate Content
What I've meant is that you can easily check the C80 DHCP server pool here:
If its LAN IP address is 192.168.0.50, its DHCP pool would serve IP addresses in 192.168.0.0/24 subnet.
The IP addresses from subnet 192.168.30.0/24 are served from another DHCP sever which is active in your network.
To pinpoint the device on which this DHCP server is configured you have to find the device with LAN IP address 192.168.30.1.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1819
Replies: 15
Voters 0
No one has voted for it yet.