HELP !!! Mercusys MR50G AC1900 Wireless Dual Band Gigabit Router is randomly restarting.
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.HELP !!! Mercusys MR50G AC1900 Wireless Dual Band Gigabit Router is randomly restarting.
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
My MERCUSYS AC1900 Wireless Dual Band Gigabit Router MR50G is randomly restarting since last few days
As there is no specifc community for Mercusys routers, i am reporting this issue here
The issue looks same as the TP Link Archer C80
Few things that i have tried
- Factory rested router
- Disabled Easy Mesh
- Auto Reboot is turned OFF
- I am on latest firmware
The logs of router is below -
Hidded some details like ip and mac address in the log
##########################################################################
# MR50G System Log
# Time = 2024-02-18 22:31:26 6643s
# H-Ver = MR50G 1.0 : S-Ver = 1.11.4 Build 230317 Rel.61934n(4555)
# L = 192.168.0.1 : M = 255.255.255.0
# WAN = PPPoE : W = [IP]: M = 255.255.255.255 : G = [IP]
# Cnt = 10624, Free = 10195, Busy = 429
##########################################################################
0days, 00:00:05, [lan]LAN: Set interface br-lan0 ip=192.168.0.1 netmask 255.255.255.0.
0days, 00:00:17, [httpd]Http server start!
0days, 00:00:19, [dhcps]Send OFFER with ip 192.168.0.100.
0days, 00:00:19, [dhcps]Send ACK to 192.168.0.100.
0days, 00:00:21, [wan]Wan ethernet port plug on.
0days, 00:00:23, [pppoe]try special dial type 0
0days, 00:00:23, [pppoe]TX PADI
0days, 00:00:28, [pppoe]TX PADI
0days, 00:00:33, [pppoe]TX PADI
0days, 00:00:38, [pppoe]TX PADI
0days, 00:00:44, [pppoe]TX PADT[session=0000]
0days, 00:00:44, [wan]advanced ddns -wanChanged
0days, 00:01:05, [pppoe]try special dial type 0
0days, 00:01:05, [pppoe]TX PADI
0days, 00:01:10, [pppoe]TX PADI
0days, 00:01:15, [pppoe]TX PADI
0days, 00:01:20, [pppoe]TX PADI
0days, 00:01:26, [pppoe]TX PADT[session=0000]
0days, 00:01:26, [wan]advanced ddns -wanChanged
0days, 00:01:37, [pppoe]try special dial type 0
0days, 00:01:37, [pppoe]TX PADI
0days, 00:01:42, [pppoe]TX PADI
0days, 00:01:47, [pppoe]TX PADI
0days, 00:01:52, [pppoe]TX PADI
0days, 00:01:52, [pppoe]RX PADO, AC-NAME=JP-BNG-J204-T3-PE-NR, AC-MAC=[MAC]
0days, 00:01:52, [pppoe]TX PADR
0days, 00:01:52, [pppoe]RX PADS[session=001c]
0days, 00:01:52, [ppp][LCP]RX CONFIGURE_REQUEST
0days, 00:01:52, [ppp][LCP]TX CONFIGURE_REQUEST
0days, 00:01:52, [ppp][LCP]TX CONFIGURE_ACK[mru=1492, auth=C023/5, magic=03669AF4]
0days, 00:01:52, [ppp][LCP]RX CONFIGURE_ACK[mru=1480, magic=000015B9]
0days, 00:01:52, [ppp][PAP]TX AUTHENTICATION_REQUEST
0days, 00:01:52, [ppp][PAP]RX AUTHENTICATION_ACK
0days, 00:01:53, [ppp][IPCP]TX CONFIGURE_REQUEST
0days, 00:01:53, [ppp][IPCP]RX CONFIGURE_REQUEST
0days, 00:01:53, [ppp][IPCP]TX CONFIGURE_ACK[[IP]]
0days, 00:01:53, [ppp][IPCP]RX CONFIGURE_NAK
0days, 00:01:53, [ppp][IPCP]TX CONFIGURE_REQUEST
0days, 00:01:53, [ppp][IPCP]RX CONFIGURE_ACK[ip=[IP], manu-dns= DNS]
0days, 00:01:54, [pppoe]ppp0 set localIp [IP] remoteIp [IP] mtu 1480
0days, 00:01:54, [wan]advanced ddns -wanChanged
0days, 00:01:54, [wan]systool sntpc -sntpRequest
0days, 00:01:54, [dnsproxy]Register Dns Detect
0days, 00:01:54, [dnsproxy]Register primary = 0x1c2999cb, secondary = 0x2c2c99cb
0days, 00:01:54, [cwmp]cwmp is not start
0days, 00:01:54, [cwmp]cwmp is not start
0days, 00:09:18, [dhcps]Send OFFER with ip 192.168.0.101.
0days, 00:09:19, [dhcps]Send ACK to 192.168.0.101.
0days, 00:31:17, [dhcps]REQUEST ip c0a80065 already reserved by [MAC]
0days, 00:31:18, [dhcps]REQUEST ip c0a80065 already reserved by [MAC]
0days, 00:31:18, [dhcps]REQUEST ip c0a80065 already reserved by [MAC]
0days, 00:31:19, [dhcps]Send OFFER with ip 192.168.0.103.
0days, 00:31:19, [dhcps]Send OFFER with ip 192.168.0.103.
0days, 00:31:20, [dhcps]Send ACK to 192.168.0.103.
0days, 00:31:20, [dhcps]Send ACK to 192.168.0.103.
0days, 01:28:38, [cwmp]cwmp is not start
0days, 01:30:09, [cwmp]cwmp is not start
0days, 01:33:18, [cwmp]cwmp is not start
0days, 01:34:18, [cwmp]cwmp is not start
0days, 01:35:18, [cwmp]cwmp is not start
Exception:|2024-02-17 4:35:29|
Assertion failed: &pppParams == params || &ppp6Params == params, file ./ppp/pppLib.c, line 864
.->[tposTaskEntry+64]->[netTask+a8]->[mt7626HandleRcvInt+214]->[ifnetReceiveMbuf+234]->[ppp_rcv+c]->[pppReceiveRtn+34]->[__assert+2c]->[excHookHandler+68]->[excJobAdd+60]->[msgQSend+20]->[tposQueueWriteCopy+50]->[tposQueueOperate+1a0]
Exception:|2024-02-17 16:23:40|
Assertion failed: &pppParams == params || &ppp6Params == params, file ./ppp/pppLib.c, line 864
.->[tposTaskEntry+64]->[netTask+a8]->[mt7626HandleRcvInt+214]->[ifnetReceiveMbuf+234]->[ppp_rcv+c]->[pppReceiveRtn+34]->[__assert+2c]->[excHookHandler+68]->[excJobAdd+60]->[msgQSend+20]->[tposQueueWriteCopy+50]->[tposQueueOperate+1a0]
Exception:|2024-02-17 19:10:48|
Assertion failed: &pppParams == params || &ppp6Params == params, file ./ppp/pppLib.c, line 864
.->[tposTaskEntry+64]->[netTask+a8]->[mt7626HandleRcvInt+214]->[ifnetReceiveMbuf+234]->[ppp_rcv+c]->[pppReceiveRtn+34]->[__assert+2c]->[excHookHandler+68]->[excJobAdd+60]->[msgQSend+20]->[tposQueueWriteCopy+50]->[tposQueueOperate+1a0]
Exception:|2024-02-17 20:59:29|
Assertion failed: &pppParams == params || &ppp6Params == params, file ./ppp/pppLib.c, line 864
.->[tposTaskEntry+64]->[netTask+a8]->[mt7626HandleRcvInt+214]->[ifnetReceiveMbuf+234]->[ppp_rcv+c]->[pppReceiveRtn+34]->[__assert+2c]->[excHookHandler+68]->[excJobAdd+60]->[msgQSend+20]->[tposQueueWriteCopy+50]->[tposQueueOperate+1a0]
Exception:|2024-02-17 22:09:41|
Assertion failed: &pppParams == params || &ppp6Params == params, file ./ppp/pppLib.c, line 864
.->[tposTaskEntry+64]->[netTask+a8]->[mt7626HandleRcvInt+214]->[ifnetReceiveMbuf+234]->[ppp_rcv+c]->[pppReceiveRtn+34]->[__assert+2c]->[excHookHandler+68]->[excJobAdd+60]->[msgQSend+20]->[tposQueueWriteCopy+50]->[tposQueueOperate+1a0]
Exception:|2024-02-18 15:18:29|
Assertion failed: &pppParams == params || &ppp6Params == params, file ./ppp/pppLib.c, line 864
.->[tposTaskEntry+64]->[netTask+a8]->[mt7626HandleRcvInt+214]->[ifnetReceiveMbuf+234]->[ppp_rcv+c]->[pppReceiveRtn+34]->[__assert+2c]->[excHookHandler+68]->[excJobAdd+60]->[msgQSend+20]->[tposQueueWriteCopy+50]->[tposQueueOperate+1a0]
Exception:|2024-02-18 19:23:33|
Assertion failed: &pppParams == params || &ppp6Params == params, file ./ppp/pppLib.c, line 864
.->[tposTaskEntry+64]->[netTask+a8]->[mt7626HandleRcvInt+214]->[ifnetReceiveMbuf+234]->[ppp_rcv+c]->[pppReceiveRtn+34]->[__assert+2c]->[excHookHandler+68]->[excJobAdd+60]->[msgQSend+20]->[tposQueueWriteCopy+50]->[tposQueueOperate+1a0]
Exception:|2024-02-18 20:40:32|
Assertion failed: &pppParams == params || &ppp6Params == params, file ./ppp/pppLib.c, line 864
.->[tposTaskEntry+64]->[netTask+a8]->[mt7626HandleRcvInt+214]->[ifnetReceiveMbuf+234]->[ppp_rcv+c]->[pppReceiveRtn+34]->[__assert+2c]->[excHookHandler+68]->[excJobAdd+60]->[msgQSend+20]->[tposQueueWriteCopy+50]->[tposQueueOperate+1a0]
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Sunrise18 Can you please share the beta firmware u received, as I'm also facing the same issue with my MR50G.
Sunrise18 wrote
Update: I have received reply from the Mercusys Global Team (support@mercusys.com) and They have provided me with beta firmware for the router, which should solve the problem of router restarting.
- Copy Link
- Report Inappropriate Content
@SpandanPaul
Can't attach link here i will message you with the link
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 7012
Replies: 12
Voters 0
No one has voted for it yet.