Vpn client stuck on connecting on deco x50
I have a vpn server set up in a remote location with both openvpn and pptp options, I can connect to said vpn server using both protocols from a different router and from a device connected via the problematic Deco x50.
From the deco x50 itself I get the issue of vpn client showing as connecting on both pptp and openvpn. I changed the dns to 8.8.8.8 and 8.8.4.4 no improvement, same result.
As mentioned, the vpn server is accessible via a different router and via phone connected through the deco, the deco itself will not connect and I need it to connect so I can enable the vpn on specific clients that do not have the vpn client option, any ideas or tips?
My vpn server is Archer vr2100v if it makes any difference...
Thank you!
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@j0ops oddly enough, entering manually the username and password solved it for me.
- Copy Link
- Report Inappropriate Content
Not for me I also did this with the codes. It connects me for 3 seconds then the internet cuts out again. Only surfshark vpn works.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 3
Views: 3676
Replies: 22
Voters 1
