port forwarding from modem to device on deco wifi mesh
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi,
I have the below network example, I want to set a port forwarding port 1234 on ip 192.168.60.xx. Can you help me on how to set ip up please ?
Thanks
Ronald
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@RonCam any help on this please ?
- Copy Link
- Report Inappropriate Content
Hi, Since you have two ruters/NATs, to avoid of Double NAT issue, It is suggested to set Deco into Access Point mode and open port 1234 on the ISP router:
How to set up Deco to work in Access Point mode
Best regards.
- Copy Link
- Report Inappropriate Content
@David-TP is it possible to leave the deco in router mode and put the deco on the same subnet of the modem?
- Copy Link
- Report Inappropriate Content
Hi, I am afraid it can't.
When Deco is in router mode, its NAT is enabled by default so that its LAN subnet would be different from the WAN subnet which is the local subnet of your ISP modem router.
Best regards.
- Copy Link
- Report Inappropriate Content
@David-TP ok. So if I leave deco in router mode port forwarding can't be done?
- Copy Link
- Report Inappropriate Content
RonCam wrote
@David-TP ok. So if I leave deco in router mode port forwarding can't be done?
It can be done, but it is more cumbersome.
You have two options:
1. Google for "port forwarding with double NAT" and "port forwarding two routers" to see how it can be done. External links are not allowed here, so you'll have to do your own googling by these key phrases.
or
2. Place Main Deco in DMZ of ISP modem (the one with static public IP). Then, just follow How to set up Port Forwarding feature on the Deco
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 752
Replies: 6
Voters 0
No one has voted for it yet.