BE800 SFP 2.5G Mode
I have a GPON SFP which supports a maximum link of 2.5G but when I am connecting it to BE800 it only connects at 1G link
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I would like to know how to bridge the SFP port of the BE900 to the LAN for direct access to GPON.
- Copy Link
- Report Inappropriate Content
@Frefo @benoitm974 @NPGrey @TW-Kang
I'm reaching out to inform you that our development team has provided beta firmware to allow you to modify the port settings, which should help resolve the speed negotiation issue you're experiencing.
Please check the following thread for more details:
GPON ONU Only Negotiate at 1Gbps with Archer BE800/BE900/GE800 V1 10Gbps SFP+ Combo Port
- Copy Link
- Report Inappropriate Content
@Kevin_Z Sorry I'm not sure to understand the solution ? Are there new firmware that were or will be provided or are you just refering to the old exiting beta firmware date from 16of December 2023 indicated that TP-link consider we shoud use this firmware and have to manually change the settings after each reboot ?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
While we refer to this as a workaround, it is not the final solution. We hope to provide this workaround to help you guys continue using our products without disruption until the issue is fully resolved.
Rest assured, our engineering team is actively addressing these compatibility issues and is committed to delivering a comprehensive resolution in future firmware updates.
- Copy Link
- Report Inappropriate Content
Regarding the speed negotiation issue, the beta firmware...
My device is the BE900 V2 version, but only the debug firmware for the BE900 V1 version is available, and the two are not compatible.
- Copy Link
- Report Inappropriate Content
TW-Kang wrote
Regarding the speed negotiation issue, the beta firmware...
My device is the BE900 V2 version, but only the debug firmware for the BE900 V1 version is available, and the two are not compatible.
I'll check with the development team about providing beta firmware for the Archer BE900 V2 and will update you once it's available.
- Copy Link
- Report Inappropriate Content
Thanks
- Copy Link
- Report Inappropriate Content
@Kevin_Z It's been 8 months that this issue persists. The provided solution is not a valid solution. You've told people you would provide a sustainable solution, I think TP-Link has to provide interoperable solution to its european customer, a reasonable delai would be 2-3months.
- Copy Link
- Report Inappropriate Content
@Kevin_Z could you give us some clarity on wether BE800 is considered an actively supported product or has support reached EOL?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 3343
Replies: 42
Voters 0
No one has voted for it yet.