Wifi automatically Turned Off again and again and somethings only 2.4 GHZ is showing
Hi Team,
I am using TP Link Router
Hardware Version:
Archer AX10 v1.20
Recently My wifi automatically turned off after 15-20 minutes and this is happen repeatedly, I am using both the bands that is 2.4 GHZ and 5 GHZ but sometimes i am having the signals of 2.4 GHZ only 5 GHZ is not showing ,
I have tried serveral ways but nothing happend i event tried reseting my router and setup again on default settings but still facing the issue when i checked the system logs of the router i Find out these logs PFA
Please Help me solve this issue now its irritating i never expected That TP links poduct disappoints me
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Are you using the router in a mesh environment - from the logs can be seen that WPS_INPROGRESS.
How about Smart Connect wireless feature is it On or Off ?
- Copy Link
- Report Inappropriate Content
Hi , I am not using the mesh network its only one router only,
and talking about Smart Connect wireless feature it is turned off i want seperate bands to connect with
Plus as you say its in progess you can also see some led command signal is coming to tell to turn of the wireless network
- Copy Link
- Report Inappropriate Content
Have you pressed the back pannel WPS button for some reason ? It's just these messages in your logs that pointed in this direction:
If you didn't press the WPS button check if it's not stuck in a pressed position.
I would reset the router once again to test if that will improve the situation - press and hold the reset button (under WPS button) for about 10 seconds while the router is powered on.
- Copy Link
- Report Inappropriate Content
I also tried these steps and reset my router from both the option on UI part and on pressing the button ,
also my router is in normal position hence not wps pressing button is there
- Copy Link
- Report Inappropriate Content
Well, the only thing you could do is to reflash the latest FW release manually and check if there's any improvement.
Check your router bottom sticker to confirm the router model, its HW version and FW region.
Here's how to do that manually (Case 1). If that doesn't help either you can contact your local support for assistance.
- Copy Link
- Report Inappropriate Content
Hi Tried these ways also but nothing happed when i am trying. to install the firmware its getting the upload error now after resetting it from the router end my wifi is not coming i tried serveral time but nothing happened
- Copy Link
- Report Inappropriate Content
Like I posted in my revious post (with a link), if nothing helps in your case - contact your local support for assistance.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 586
Replies: 7
Voters 0
No one has voted for it yet.