Home Network Community > Deco > Unable to connect to internet with last frimware
< Deco

Unable to connect to internet with last frimware

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Unable to connect to internet with last frimware

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Unable to connect to internet with last frimware
Unable to connect to internet with last frimware
2024-05-21 14:36:03
Tags: #Firmware Update #Reports
Model: Deco X50-5G  
Hardware Version: V1
Firmware Version: 1.1.3 Build 20240109 Rel. 73423

Hi

i have TP-LINK Deco X50 5G

I'm from Iran i couldn't connect to internet when I upgrade to last version of this deco 1.1.3 build20240109.

i need help to downgrade  to firmware Deco X50-5G(EU)_V1_1.0.0 Build 20221226

its only firmware its work in my country.

  2      
 
  2      
 
#1
Options
8 Reply
Re:Unable to connect to internet with last frimware
2024-05-22 06:25:29

  @abbasi83 

Hi, I think you could try to install the latest 1.1.5 firmware here to see whether it helped:

Deco X50-5G 1.1.5 with Bridge Mode and Cell Lock

Wait for your reply and best regards.

▶Check What's Currently Going on With Deco ▶Deco X50_V1_1.8.0 Significantly Expanded the Client Connection Details and Added Channel Selection ▶Deco X50/X55_V1.3_1.3.1 Introduced Channel Selection, WiFi Access Control and WireGuard VPN ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
  0  
  0  
#2
Options
Re:Unable to connect to internet with last frimware
2024-05-22 08:57:50

  @David-TP 

 It still doesn't work Because it is the only firmware version that works its firmware Deco X50-5G(EU)_V1_1.0.0 Build 20221226

i need help to downgrade it

 

  0  
  0  
#3
Options
Re:Unable to connect to internet with last frimware
2024-05-23 10:08:20

  @abbasi83 

Hi, sorry for the delay.

the firmware downgrade from 1.1.5/1.1.3 to 1.0.0 might need to be implemented via firmware recovery:

How to use firmware recovery on Deco- HTTP Uboot Method

1.0.2 firmware download link:(I couldn't find 1.0.0 and 1.0.2 is the only version I could find now, sorry!)

https://static.tp-link.com/upload/firmware/2023/202306/20230604/Deco_X50-5G_1.0_1.0.2 Build 20230411.zip

 

Thank you very much and best regards.

▶Check What's Currently Going on With Deco ▶Deco X50_V1_1.8.0 Significantly Expanded the Client Connection Details and Added Channel Selection ▶Deco X50/X55_V1.3_1.3.1 Introduced Channel Selection, WiFi Access Control and WireGuard VPN ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
  0  
  0  
#4
Options
Re:Unable to connect to internet with last frimware
2024-05-23 16:50:32

  @David-TP 

Now it is completely broken and does not connect at all and the yellow light is constantly flashing

what's must be doing ? 

  0  
  0  
#5
Options
Re:Unable to connect to internet with last frimware
2024-05-24 00:57:36

  @abbasi83 

Hi, Did the flashing yellow LED start after you long-hold the reset pinhole to get into recovery mode? or after uploading the 1.0.2 bin file?

If we power it off for a few minutes, then power it back, will it become solid yellow---> solid red--->flashing blue in the end?

 

If it is constantly flashing yellow without any change, please try to hold the reset pinhole for only 1 second this time, then check whether there would be any change to the LED status

Wait for your reply and best regards.

 

▶Check What's Currently Going on With Deco ▶Deco X50_V1_1.8.0 Significantly Expanded the Client Connection Details and Added Channel Selection ▶Deco X50/X55_V1.3_1.3.1 Introduced Channel Selection, WiFi Access Control and WireGuard VPN ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
  0  
  0  
#6
Options
Re:Unable to connect to internet with last frimware
2024-05-24 13:04:07

  @David-TP 

Hello, yes, after uploading the 1.0.2 version, it showed a success message, after turning off the modem, it kept showing a yellow light, and when I hold the reset button, the color turns blue, but it doesn't come out of this mode. other.
I even downloaded newer versions like 1.1.5 and uploaded them, but it still didn't work and it keeps showing the yellow light.

  0  
  0  
#7
Options
Re:Unable to connect to internet with last frimware
2024-05-27 10:26:38

  @abbasi83 

Hi,

Here is the LED Status explanation on the Deco X50-5G:

If the LED is flashing blue now, Deco X50-5G is ready for re-configuration. 

Usually after a power restart or firmware recovery, it might take about 1 minute for Deco to turn from yellow to flashing blue.

The good news is that I managed to find the 1.0.0 version of Deco X50-5G(EU).

https://static.tp-link.com/upload/firmware/2023/202303/20230308/Deco_X50-5G_1.0_1.0.0_20221226.zip

 

Wait for your good news and best regards.

▶Check What's Currently Going on With Deco ▶Deco X50_V1_1.8.0 Significantly Expanded the Client Connection Details and Added Channel Selection ▶Deco X50/X55_V1.3_1.3.1 Introduced Channel Selection, WiFi Access Control and WireGuard VPN ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
  0  
  0  
#8
Options
Re:Unable to connect to internet with last frimware
2024-11-20 18:29:08

Tags: #Firmware Update #Reports

Model: Deco X50-5G  

Hardware Version: V1

Firmware Version: 1.1.3 Build 20240109 Rel. 73423

 

 

Hey Everyone, I have the same issue, I searched in the Internet, It's seems that old framewares work for us in Iran but new framework don't work.

I wanted to Downgrade my Deco but it seems there is some issue. The frameware is about 150 MB but As I read the tools that is used for downgrade has 32MB limitaion.

 

Can I ask you to help me how downgrade it and how can I find All framewares before `Firmware Version: 1.1.3 Build 20240109 Rel. 73423`

 

I Also inforemd Middle East TP-Link support about this issue.

  0  
  0  
#9
Options

Information

Helpful: 2

Views: 1164

Replies: 8

Tags

Firmware Update Reports
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.