Virtual Server (NAT) Not work with 2 Active WAN Links
I have a set up with 2 WANs and internal LAN.
1. Out of the 2 WAN links one (WAN/LAN1) gets a fixed public IP over PPPoE and the port is configured accordingly for direct negotiation with ISP on the load balancer.
2. The other WAN comes via another router forwarding a static private IP to the WAN port of ER605 over ethernet which is configured with a static IP with from the private subnet.
3. On virtual server - http / https and ssh is forwarded from WAN/LAN1 to a reserved static ip (assigned by ER605 IP reservation) hosted on an internal server.
All redirection, while accessing the public IP from the Internet (outside internal LAN) works when only WAN/LAN1 (which is redirected) link is active and the other WAN is down. It does not work when both the WAN links are active.
The same configuration used to work with TL R407 load balancer which had 100 mbps ports.
Any suggestion would be much appreciated.