TP switch modify signal
Hi
I'm trying to connect a ChargeAmps box thru cable.
I have one exit coming from the main router (google). From this exit, one cable goes in to a TP link which split to one cable to our boiler and the other cable to ChargeAmps. The ChargeAmps refuse to connect.
In a 2nd scenario, I add another google router between the switch and ChargeAmps and make the ChargeAmps connect direct to the router. ChargeAmps connect.
I don't understand why the ChargeAmps connect in the 2nd scenario but not the first as the TP link should not modify the signal.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, may I know the model number of your TP-Link switch?
Have you checked with ChargeAmps technical support to see whether it requires extra configuration?
Thank you very much and best regards.
- Copy Link
- Report Inappropriate Content
the Switch model is TL-SG105.
The strange thing is that it works connecting direct to the router, but not thru the switch.
I have the answer from ChargeAmps, sorry for putting it Swedish.
ChargeAmps asked me the following
Nätverkskrav/produktinfo:
DHCP. Endast dynamiska IP-adresser inte statiska
Port 80 måste vara öppen
• Våra laddboxar kommunicerar till våra server hos Microsoft Azure på Irland
• Stödjer endast WPA 2 kryptering och inte WPA 3
• Kanaler för wifi är 1, 6, 11
• Halo, Aura och Amp Guard stödjer endast 2.4GHz frekvens inte 5G så router med dual band mot samma SSID kan innebära problem. Speciellt för Amp Guard.
• Det går att pinga laddboxarna men inte Amp Guard
• MAC-adress finns inte att få fram från vårat håll utan måste tas från nätverket. Om inte nätverket kan öppnas pga säkerhet så koppla dom tillfälligt mot t ex en mobil för att ta MAC-adress
• SSID och lösenord får endast vara 32 tecken långt
IP-adresser
Laddboxen kräver dynamiska IP-adresser, DHCP.
- Copy Link
- Report Inappropriate Content
Hi, Thanks for the update.
How about other devices? Can they work well when connecting to TL-SG105?
TL-SG105 is plug-and-play without any software features and works just like a long Ethernet cable. It doesn't even have an IP address.
The suggestions provided by ChargeAmps mainly refer to the WiFi connection but TL-SG105 doesn't have any wireless access.
Best regards.
- Copy Link
- Report Inappropriate Content
Yes, when connecting a router behind the switch, this get immediate access to internet.
I think the boiler also works without problem.
Can it be a conflict having the boiler and chargeamps to the same switch?
The chargeamps works when connecting direct to the router behind the switch.
/Henrik
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 248
Replies: 4
Voters 0
No one has voted for it yet.