Please help with noob friendly guide to create a working VPN in my network
Please help with noob friendly guide to create a working VPN in my network
Hello everyone!
I have tried to follow the VPN guidelines for my device (ER605) but for some reason, the VPN doesn't work. I have tried it multiple times with few different settings.
Could anyone please help me setting up a Wireguard or OpenVPN for my network? I have made a PDF/word file to show my network with best of my capabilities. PFA.
I have two ISPs, both with Dyamic IP (I can get a static IP from one ISP, if that is a must have to enable VPN). I have enabled NO-IP in all three routers with different hostnames (2 from ISPs and one is ER605).
At the moment, my end goal is to enable easy and unattended remote access with RDP.
If more info is needed, please let me know.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello. Good evening!
I have spent one whole day but I was not able to access windows shared folders using the wireguard VPN and I think this is beyond you too at the moment. So I guess I'll have to use some other router or seek a separate solution.
I connected the ER605 with a software controller on a local PC/laptop with internal IP 192.168.11.100.
Could you please help me port forward at WAN1 (Airtel, Static). I went in Transmission > NAT > Port Forwarding, entered a random port number (34567)
I also created a rule in "Gateway ACL" as I read somewhere on this forum itself that port forwarding this rule to work in ER605.
Yet, when using the specified laptop and visting canyouseeme.org or any other similar website for that matter, opened port is always shown as CLOSED.
- Copy Link
- Report Inappropriate Content
Thanks for posting in our business forum.
PushkarYadav wrote
Hello. Good evening!
I have spent one whole day but I was not able to access windows shared folders using the wireguard VPN and I think this is beyond you too at the moment. So I guess I'll have to use some other router or seek a separate solution.
I connected the ER605 with a software controller on a local PC/laptop with internal IP 192.168.11.100.
Could you please help me port forward at WAN1 (Airtel, Static). I went in Transmission > NAT > Port Forwarding, entered a random port number (34567)
I also created a rule in "Gateway ACL" as I read somewhere on this forum itself that port forwarding this rule to work in ER605.
Yet, when using the specified laptop and visting canyouseeme.org or any other similar website for that matter, opened port is always shown as CLOSED.
Regarding the VPN tunnel, as long as you can access the remote network, and your access is not blocked by the firewall or rules on the computer, it should work.
I use WG at the office and my cellphone while I am not at home. The local SMB server on my Win11 works perfectly as long as the VPN is up and the authority is configured properly.
Discovery is not really possible for my regular router as well and lucky me that I know the IP addresses of the main gears I have.
About the port forwarding, Virtual Services(Port Forwarding) on the Router Doesn't Take Effect
When you set up the port forwarding, the ACL is not necessary to permit.
- Copy Link
- Report Inappropriate Content
Hi again
So i was able to setup vpn successfully on my router as I mentioned earlier but could you please tell me what the allowed IP address I should put in my wireguard settings.
For a reminder, at the moment, my static IP comes from company router (192.168.1.1), it goes to my ER605 (192.168.11.1).
In the Wireguard VPN settings of the router, I have given 192.168.11.254 to my Wireguard.
In the PEER of router settings and INTERFACE of Windows wireguard app for my laptop, I have provided 10.0.0.2/32 as allowed IP address.
I can connect to this wireguard setup successfully from outside the network but I still cannot access shared windows folders on the network even when using the direct internal/lan address.
Please let me know if you can help with this!
- Copy Link
- Report Inappropriate Content
Thanks for posting in our business forum.
PushkarYadav wrote
Hi again
So i was able to setup vpn successfully on my router as I mentioned earlier but could you please tell me what the allowed IP address I should put in my wireguard settings.
For a reminder, at the moment, my static IP comes from company router (192.168.1.1), it goes to my ER605 (192.168.11.1).
In the Wireguard VPN settings of the router, I have given 192.168.11.254 to my Wireguard.
In the PEER of router settings and INTERFACE of Windows wireguard app for my laptop, I have provided 10.0.0.2/32 as allowed IP address.
I can connect to this wireguard setup successfully from outside the network but I still cannot access shared windows folders on the network even when using the direct internal/lan address.
Please let me know if you can help with this!
Follow the guide and make sure that the allowed IP is properly configured.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 863
Replies: 14
Voters 0
No one has voted for it yet.