Home Network Community > Deco > Deco X50/X55_V1-1.6.1 Supports Internet Backup, Hybrid-Mesh and DOH/DOT
< Deco

Official Release Deco X50/X55_V1-1.6.1 Supports Internet Backup, Hybrid-Mesh and DOH/DOT

12345

Official Release Deco X50/X55_V1-1.6.1 Supports Internet Backup, Hybrid-Mesh and DOH/DOT

Official ReleaseDeco X50/X55_V1-1.6.1 Supports Internet Backup, Hybrid-Mesh and DOH/DOT
Deco X50/X55_V1-1.6.1 Supports Internet Backup, Hybrid-Mesh and DOH/DOT
2024-09-19 11:02:24 - last edited Thursday
Tags: #Firmware Update #Official #DoH/DoT
Model: Deco X50   Deco X55  
Hardware Version: V1
Firmware Version:

This Article Applied to

Deco X50/X55_V1(V1.6) only

Note: Deco X50/X55_V1.2/V1.3 can't install this version. Nor did Deco X50-outdoor/Deco X50-POE

 

 

Modifications and Improvement

Note: Some features are not supported in Access Point mode.

1. Support Internet Backup via Hotspot Backup and Hybrid-Mesh Backup Mode.
2. Added DoH/DoT under Deco APP>More>Advanced.
3. Support 20MHz/40MHz automatic bandwidth selection to enhanced 2.4GHz WiFi performance.

 

Firmware Download Link

 

Deco X50_V1/1.6

1.6.1_build_20241010_Official Version

Newly updated to Deco 1.12.0 Firmware Platform

Deco X55_V1/1.6

1.6.1_build_20241010_Official Version

Newly updated to Deco 1.12.0 Firmware Platform

 

Update Advice:
1. Please make sure the Deco APP is up-to-date.
2. How to manually update the firmware via web UI- How to Update the Firmware of Deco.
3. The firmware downgrade needs to be through Firmware Recovery-How to Downgrade Deco.

 

 

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More ▶Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.
  2      
 
  2      
 
#1
Options
42 Reply
Re:Deco X50/X55_V1-1.6.0 Supports Internet Backup, Hybrid-Mesh and DOH/DOT
2024-09-19 11:45:01

  @David-TP 

 Internet Backup via Hotspot Backup and Hybrid-Mesh Backup Mode will be very usefull option I think.

Thank you, I will try it!

:)

  1  
  1  
#2
Options
Re:Deco X50/X55_V1-1.6.0 Supports Internet Backup, Hybrid-Mesh and DOH/DOT
2024-09-19 23:00:35

  @David-TP 

Thanks David for updating the community despite being in the late Q4 of 2024, usually I notice TP-Link only releases big major improvement during mid of the year. but this has changed my perception of it. 

Will definitely give this version a try out as they finally implemented DoH and DoT.

  1  
  1  
#4
Options
Re:Deco X50/X55_V1-1.6.0 Supports Internet Backup, Hybrid-Mesh and DOH/DOT
2024-09-20 03:16:00
This is a great news for Deco users. Will other Deco models especially the BE series (BE65, BE85 etc) receive DoT & DoH support too?
  1  
  1  
#5
Options
Re:Deco X50/X55_V1-1.6.0 Supports Internet Backup, Hybrid-Mesh and DOH/DOT
2024-09-20 06:44:21

  @Zell13 

Hi, yes, they are also on the plan.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More ▶Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.
  1  
  1  
#6
Options
Re:Deco X50/X55_V1-1.6.0 Supports Internet Backup, Hybrid-Mesh and DOH/DOT
2024-09-21 09:30:21
Tried that, it looks like the problem with Deco app and devices not showing where are connected ( deco app shows those devices as connected to other) remains with fing enabled or disabled. PPPoE disconnects more often (once per day ) but this problem maybe temporarily
  2  
  2  
#7
Options
Re:Deco X50/X55_V1-1.6.0 Supports Internet Backup, Hybrid-Mesh and DOH/DOT
2024-09-22 04:50:54 - last edited 2024-09-22 08:07:52

  @David-TP Are this features coming to Deco x60 V3? Especially the 20 Mhz/40 Mhz channel width selection. Also how will this feature work if i have 3 deco x50 with 3 deco e4? Will e4s also shift 2.4 Ghz to 20 Mhz channel width?

  2  
  2  
#8
Options
Re:Deco X50/X55_V1-1.6.0 Supports Internet Backup, Hybrid-Mesh and DOH/DOT
2024-09-22 09:17:15 - last edited 2024-09-22 13:15:01

  @David-TP 

after 1 day upgrading in to this firmware problems arises .

Devices went to "other" connection status, PPPoE connections showed as connected but the internet was lagging , WiFi (5Ghz) was full but no connection to internet , tried ping 192.168.68.1 with timeouts . Restarting didn't do anything good.

Too many issues to stay on this one, had to revert back to 1.6.0 release 61500 (20240801). 
back to normal.

  1  
  1  
#9
Options
Re:Deco X50/X55_V1-1.6.0 Supports Internet Backup, Hybrid-Mesh and DOH/DOT
2024-09-23 22:42:59

  @David-TP I was pretty impressed with your release cycle seeing the firmware dated 2027, but I see that the actual file is 2024 laugh

 

  1  
  1  
#10
Options
Re:Deco X50/X55_V1-1.6.0 Supports Internet Backup, Hybrid-Mesh and DOH/DOT
2024-09-24 01:45:05

  @klellman 

surprise, I haven't noticed the typos. The date has been changed and Thank you very much!

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More ▶Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.
  0  
  0  
#11
Options
Re:Deco X50/X55_V1-1.6.0 Supports Internet Backup, Hybrid-Mesh and DOH/DOT
2024-09-24 01:49:44

  @AdiPatil 

Hi, It is planned to roll out the similar firmware for other models. However, the ETA is unclear for a specific model.

"Also how will this feature work if i have 3 deco x50 with 3 deco e4? Will e4s also shift 2.4 Ghz to 20 Mhz channel width?"

- I think it should depend on the main Deco. Then the satellite Deco will follow the settings.

Thank you and best regards.

▶Check What's Currently Going on With Deco ▶Deco Starts Supporting Changing Wireless Channels! Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter Deco BE65_V2_1.1.0 Supports WireGuard VPN, Channel Selection and More ▶Deco APP 3.8.102/3.8.112-Ready for A New Deco Onboarding Experience! Try to leave a Message if urgent help is required.
  0  
  0  
#12
Options
12345

Information

Helpful: 2

Views: 7420

Replies: 42

Tags

Firmware Update Official DoH/DoT
Related Articles
 Deco X50/X55_V1_1.5.5 Support WireGuard VPN, Client Speed Limit and Fixed WAN Port
34848 2
 New 1.3.1 Firmware for Deco X50/X55 Adds Support for Whitelist and Matter
20677 8
 Deco Internet Backup Feature Guide
103 0
 Improve Network Status and APP Control on Deco X50/X55
2520 3
 ECO Mode on Deco X50/Deco X55
3249 3
 Deco X50-5G-V1-1.2.0 Supports WireGuard VPN, Hybrid Mesh and More
321 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.