Early Access Deco X50/X55_V1-1.6.0 Supports Internet Backup, Hybrid-Mesh and DOH/DOT
This Article Applied to
Deco X50/X55_V1(V1.6) only
Note: Deco X50/X55_V1.2/V1.3 can't install this version. Nor did Deco X50-outdoor/Deco X50-POE.
Firmware Download Link
Deco X50/X55_V1 |
1.6.0_build_20240903_Beta |
Newly updated to Deco 1.12.0 Firmware Platform |
Update Advice:
1. Please make sure the Deco APP is up-to-date.
2. How to manually update the firmware via web UI- How to Update the Firmware of Deco.
3. The firmware downgrade needs to be through Firmware Recovery-How to Downgrade Deco.
Modifications and Improvement
1. Support Internet Backup via Hotspot Backup and Hybrid-Mesh Backup Mode.
2. Added DoH/DoT under Deco APP>More>Advanced.
3. Support 20MHz/40MHz automatic bandwidth selection to enhanced 2.4GHz WiFi performance.
Note: Some features are not supported in Access Point mode.
Deco Internet Backup Feature Guide
Internet Backup keeps the Deco Mesh system always online by switching to a backup network when the original ISP network is disconnected to ensure constant internet access. There are 3 backup modes available and only one mode can be enabled at a time.
How to enable Internet Backup
- Open your Deco app, and go to More > Advanced >Internet Backup.
- or Go to More > Internet Connection > Internet Backup.
Hotspot Backup Mode
Allow Deco to connect to a hotspot backup network wirelessly, like your mobile hotspot, or other secured wireless networks nearby.
How to enable Hotspot Backup Mode
1. Set a fixed WAN port
2. Select a nearby hotspot for network backup.
3. (Optional) Edit the Advanced Hotspot Backup settings
- Add multiple wireless networks to the Hotspot List.
- Set Speed Limit and Access Permission.
Both 4G/5G Backup and Hybrid Mesh Backup Modes require having an extra Deco 4G/5G model in the Mesh system, such as Deco X50-5G.
4G/5G Backup Mode
The Deco 4G/5G model is set as the main Deco and works in wireless router mode. Actually, this Internet Backup method is not dedicated to the Deco X50/X55_1.6.0 firmware and many Deco 4G/5G routers already support this feature.
For more details, please refer to How to set up 3G/4G or 4G/5G Backup on Deco router.
Hybrid Mesh Backup Mode
The Deco 4G/5G model is set as the satellite Deco and works in wireless router mode. It is very useful when Deco X50 is the main Deco and Deco X50-5G is added as the satellite unit. After the primary network is restored, Deco will automatically switch back to the ISP cable service.
How to enable Hybrid Mesh Backup Mode
1. Set a fixed WAN port under More > Advanced > WAN Port.
2. Configure 4G/5G Backup settings
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thank you very much for the feedback.
It has been reported to the engineers for further confirmation.
I will also check whether there might be similar feedback later.
Best regards.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi, the EU and US versions used the same 1.6.0 beta download link. During the firmware upgrade, the hardware will automatically abstract the correct bin file according to the embedded region code.
Thank you very much and best regards.
- Copy Link
- Report Inappropriate Content
@David-TP Internet-backup is indeed wonderful and long-awaited feature! But it would be even more cool, if it would be possible to use another WAN port as backup too: set up primary WAN port and secondary, if internet on primary becomes unavailable auto-switch to secondary WAN port, would that be possible to implement? Thank you!
- Copy Link
- Report Inappropriate Content
Hi, Thanks for the feedback.
I'm afraid it hasn't been planned yet. You could start a new feature request post here so other users could vote here to add more support.
Best regards.
- Copy Link
- Report Inappropriate Content
!---- > Note: Deco X50/X55_V1.2/V1.3 can't install this version. Nor did Deco X50-outdoor/Deco X50-POE.
When can we except this update for different hardware version?
Also when configuration backup feature is going to be added? It is crucial to have when I want to test new features and something goes wrong
- Copy Link
- Report Inappropriate Content
@David-TP thank you for this link. I do not see a fix for the bad cliënt online - offline status in Deco app in the release notes.
I am on 1.5.5 for version V1 EU and I, and many others, experience that clients that are online are displayed as offline, or even worse, they are not visible in the client list.
when is this major issue going to be fixed? I see this as a security issue, and this is an issue even since 1.4 a year ago.
- Copy Link
- Report Inappropriate Content
Hi, I think you could try to install the beta APP here which has optimized the online client status on the Deco APP:
Deco APP 3.8.36 --- Greatly Optimized Network Management Experience
Thank you very much and best regards.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi, I'm afraid there hasn't yet. If there is later, I will update this post as soon as possible.
Thank you very much and best regards.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 2
Views: 5853
Replies: 26
Voters 1
