Network card settings

Network card settings

Network card settings
Network card settings
2024-10-03 20:24:36 - last edited 2 weeks ago
Model: Archer T3U Nano  
Hardware Version: V7
Firmware Version: Don't know, maybe newest

How to change these settings to have maximum internet speed? I have on phone maximum speed but on network card is lower than 50% of maximum speed in the same place. My card has more maximum wireless speed than my network, network speed is 300Mb/s and maximum wireless speed of network card is 1267Mb/s.

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:Network card settings-Solution
2 weeks ago - last edited 2 weeks ago

  @wojtas 

Hi, For Archer T3U Nano, it is

400 Mbps on 2.4GHz and 867 Mbps on 5GHz.

If the host router is 300mbps, within a proper distance, the expected wireless speed over 5GHz can be 200-250m/s.

 

Please try to install the latest beta driver here:

https://community.tp-link.com/en/home/forum/topic/509006

Then change the wireless channel on the host router to channel 40/48 if possible.

Since the adapter is Nano size, please also try to keep it in clear sight of the Host router. 5-8 meters would be much better.

For more details on the placement, please refer to How to improve the speed of TP-Link wireless adapters

Thank you very much and best regards.

Recommended Solution
  0  
  0  
#4
Options
3 Reply
Re:Network card settings
2024-10-13 09:35:28

  @wojtas 

Hi,

 

How much wired speed can you get directly from the router?

 

Here you can refer to case 1 in this thread and check whether the wireless speed you get is slow and also do the troubleshooting steps.

What should I do if the TP-Link network adapter is not working properly in my computer?

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options
Re:Network card settings
2024-10-13 13:19:38

  @Sunshine 300Mb/s

  0  
  0  
#3
Options
Re:Network card settings-Solution
2 weeks ago - last edited 2 weeks ago

  @wojtas 

Hi, For Archer T3U Nano, it is

400 Mbps on 2.4GHz and 867 Mbps on 5GHz.

If the host router is 300mbps, within a proper distance, the expected wireless speed over 5GHz can be 200-250m/s.

 

Please try to install the latest beta driver here:

https://community.tp-link.com/en/home/forum/topic/509006

Then change the wireless channel on the host router to channel 40/48 if possible.

Since the adapter is Nano size, please also try to keep it in clear sight of the Host router. 5-8 meters would be much better.

For more details on the placement, please refer to How to improve the speed of TP-Link wireless adapters

Thank you very much and best regards.

Recommended Solution
  0  
  0  
#4
Options