Remote Access

Remote Access

Remote Access
Remote Access
2024-10-21 06:33:18 - last edited a week ago
Model: Archer VR1200  
Hardware Version: V1
Firmware Version: 1.0.0.0.8.0 v600e.0

I have a wood stove, that is connected to the router.  For maintenance purposes, the manufacturer has to be able to access the wood stove over the internet.
Is it possible to limit access only to the wood stove so that my network is protected? Thank you very much for your support and have a nice day.

  0      
  0      
#1
Options
1 Accepted Solution
Re:Remote Access-Solution
2024-10-21 16:29:00 - last edited a week ago

  @Sens_Residence1 

 

Most probably you can use port forwarding (same as virtual server) on your router to enable the manufacturer access - details.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  1  
  1  
#2
Options
1 Reply
Re:Remote Access-Solution
2024-10-21 16:29:00 - last edited a week ago

  @Sens_Residence1 

 

Most probably you can use port forwarding (same as virtual server) on your router to enable the manufacturer access - details.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  1  
  1  
#2
Options