Need help - to connection Speed 100Mbps to 1000Mbps

S_R_Pavel

a week ago

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-12-10

Need help - to connection Speed 100Mbps to 1000Mbps

a week ago

Tags: #Network Connectivity

Model: Archer C6

Hardware Version: V4

Firmware Version: 1.13.6 Build 240430 Rel.54880n(5553)

First setup by app it shows me "Your Ethernet cable connected to the WAN port does not support gigabit speeds. Please use an RJ45 CAT 5e/6/7/8 Ethernet cable"

I have used the cable (CAT5e) whice is given in box with router. And I am using HG8310M - model ONU.

It shows 100Mbps. Help me to connect gigabyte (1000Mbps) speed.

Please help me.

1 Reply

Joseph-TP

a week ago

Posts: 824

Helpful: 64

Solutions: 174

Stories: 0

Registered: 2024-06-22

Re:Need help - to connection Speed 100Mbps to 1000Mbps

a week ago

Hi @S_R_Pavel，

Auto-negotiation allows a port on a router to communicate with the wired device to determine the optimal duplex mode and speed for the connection.
To enable the Auto-Negotiation on the internet port, Please log into your router's web management page by visiting: https://tplinkwifi.net
Then go to Advanced->Internet-> Internet Port Negotiation Speed Setting and select "Auto-Negotiation". You can also set the port to "1000Mbps Full Duplex" or "100Mbps Full Duplex".

Need help - to connection Speed 100Mbps to 1000Mbps

Need help - to connection Speed 100Mbps to 1000Mbps

Information

Voters 0

Tags