Home Network Community > Deco > DECO X60 Access Point Mode
< Deco

DECO X60 Access Point Mode

DECO X60 Access Point Mode

DECO X60 Access Point Mode
DECO X60 Access Point Mode
Tuesday
Tags: #Access Point Mode #Deco Ethernet Backhaul
Model: Deco X60  
Hardware Version: V4
Firmware Version: 1.2.9

Network map:

 

archer c6 (router) (second floor 1st bedroom) -> deco x60 (second floor 2nd bedroom)

 

                              |

 

deco x60 (main) (living room) (first floor)

 

 

All are connected via ethernet backhaul wired by using cat 6 cables. Both the decos are in access point mode.

 

Archer C6 router and main deco (living room) giving speeds of 198 mbps  of 200 mbps ISP. deco in the bedroom room second floor is only giving 95mbps

 

Please give me suggestions to get the same speed for the bedroom deco as well.

 

 

File:
IMG_9075.jpgDownload
  0      
 
  0      
 
#1
Options
5 Reply
Re:DECO X60 Access Point Mode
Tuesday

  @Wifi_Guy 

 

Must be an issue with your ethernet cable to that Deco, if you move that Deco to right next to or near the C6 and try a different/shorter ethernet cable, then check you are connected to that Deco and run a speed test, what do you get?

 

BT Full fibre 500, 1x X60 V3.2 in router mode and 1 x XE75Pro V2.
  0  
  0  
#2
Options
Re:DECO X60 Access Point Mode
Tuesday

  @Wifi_Guy 

 

Also if the C6 has easymesh feature  make sure that is switched off on the C6 web GUI as it can interfere with Deco in AP mode.

BT Full fibre 500, 1x X60 V3.2 in router mode and 1 x XE75Pro V2.
  1  
  1  
#3
Options
Re:DECO X60 Access Point Mode
Wednesday - last edited Wednesday

  @klipse 

I tried using the another cable with the deco and it gave me 190  mbps. 

 

The cable which is connected to the living room deco is Cat 6 and the cable connected to bedroom deco is Cat 5e.

 

So, is it problem with the cable of 5e? or its limited speed?

 

Also I have turned the easymesh feature to off years ago and its still in off only.

 

 

 

 

 

  0  
  0  
#4
Options
Re:DECO X60 Access Point Mode
Yesterday

  @Wifi_Guy 

 

Sounds like a faulty cable to me then, 5e should easily handle 200mbps, could be a faulty connector on either end or a damaged cable. Best to replace.

BT Full fibre 500, 1x X60 V3.2 in router mode and 1 x XE75Pro V2.
  0  
  0  
#5
Options
Re:DECO X60 Access Point Mode
Yesterday

  @klipse 

 

okay i will replace to cat 6 and let you know again.

 

Thank you.

  0  
  0  
#6
Options

Information

Helpful: 0

Views: 87

Replies: 5

Tags

Access Point Mode Deco Ethernet Backhaul
Related Articles
 what is the SSID of the Deco X60 in access point mode/
353 0
 X60 in access point mode completely unusable
333 1
 X60 : DHCP server that activates at the access point
543 0
How to add a new Deco Unit to a network in Access Point Mode?
92 0
Deco X60 (V3) Not updating firmware
355 1
Deco X60 DHCP stays active in AP mode.
889 1
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.