Home Network Community > Deco > Deco X50 160 mhz
< Deco

Deco X50 160 mhz

Deco X50 160 mhz

Deco X50 160 mhz
Deco X50 160 mhz
2025-04-16 06:39:48 - last edited 2025-04-21 01:23:15
Tags: #Network Connectivity
Model: Deco X50  
Hardware Version: V1
Firmware Version: 1.2.10

Hello,

 

I have bought 2 Deco X50 units. It is working perfectly.

 

But I noticed there is only 80 mhz no 160.

 

Is it due to country restrictions.

 

I'm from Bangladesh

  1      
 
  1      
 
#1
Options
1 Accepted Solution
Re:Deco X50 160 mhz-Solution
2025-04-17 08:59:25 - last edited 2025-04-21 01:23:15

  @Aero840 

Hi, welcome to the community.

It is very likely due to the local WiFi regulation.

I remember the 5 GHz in BD only uses band 4 (channel 149/153/157/161/165), and the maximum bandwidth of all channels isn't enough for 160 MHz.

Thank you very much.

Best regards.

 

 

 

▶Check What's Currently Going on With Deco ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
Recommended Solution
  0  
  0  
#2
Options
3 Reply
Re:Deco X50 160 mhz-Solution
2025-04-17 08:59:25 - last edited 2025-04-21 01:23:15

  @Aero840 

Hi, welcome to the community.

It is very likely due to the local WiFi regulation.

I remember the 5 GHz in BD only uses band 4 (channel 149/153/157/161/165), and the maximum bandwidth of all channels isn't enough for 160 MHz.

Thank you very much.

Best regards.

 

 

 

▶Check What's Currently Going on With Deco ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
Recommended Solution
  0  
  0  
#2
Options
Re:Deco X50 160 mhz
2025-04-19 16:44:45

  @David-TP My Deco X50 v1.30 US sometimes shows 160ghz and then immediately goes back to 80ghz. I have X10, M4v2 mesh connected to my Deco X50. I thought it was because of these but now I see another problem. Which is some instructions from my country.

File:
Screenshot_2025-04-17-12-27-35-61_f49179b090611efe64122144cd8cb960.jpgDownload
Sayeem Ahmed from Bangladesh
  0  
  0  
#3
Options
Re:Deco X50 160 mhz
2025-04-19 17:11:28

  @Aero840 Because all 4 channels 149/153/157/161 works on 20 MHz + 20 + 20 + 20 = 80 MHz 

Please & Thank You !! ❤️
  0  
  0  
#4
Options

Information

Helpful: 1

Views: 398

Replies: 3

Tags

Network Connectivity
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.