Need to open some ports, but can't activate NAT? TD-W8901G

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Need to open some ports, but can't activate NAT? TD-W8901G

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Need to open some ports, but can't activate NAT? TD-W8901G
Need to open some ports, but can't activate NAT? TD-W8901G
2015-04-08 05:16:24
Region : Argentina

Model : TD-8816

Hardware Version : V8

Firmware Version :

ISP :


NAT is enabled but always shows as 'deactivated', so cant forward any ports :( Stuck on this, please help - screen shots are linked below.

https://dl.dropboxusercontent.com/u/33809233/Screenshot%202015-04-07%2022.06.48.png

https://dl.dropboxusercontent.com/u/33809233/Screenshot%202015-04-07%2022.11.23.png

https://dl.dropboxusercontent.com/u/33809233/Screenshot%202015-04-07%2022.15.23.png
  0      
  0      
#1
Options
1 Reply
Re:Need to open some ports, but can't activate NAT? TD-W8901G
2015-04-14 11:27:17
You must have misunderstood this PVC thing..

What you are using to dail-up for Internet is PVC6. PVC0 should be deactivated, that is normal.

If you want to open some ports for your internal hosts, you should select PVC6 and follow this FAQ to open the ports you need.
http://uk.tp-link.com/article/?faqid=205
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 515

Replies: 1