Home Network Community > Deco > Deco X50-5G no static routes?
< Deco

Deco X50-5G no static routes?

Deco X50-5G no static routes?

Deco X50-5G no static routes?
Deco X50-5G no static routes?
2025-04-22 11:24:16
Tags: #Firmware Update
Model: Deco X50-5G  
Hardware Version: V1
Firmware Version: 1.1.7

Hello!

 

I've received a X50-5G recently. Unfortunatly i've checked the hardware version too late and just found out it is v1. But nevertheless, issue might be the same with v1.2 and v2.

Is there no support for static routes? I have a VPN running and need them. 

 

Thanks

  1      
 
  1      
 
#1
Options
8 Reply
Re:Deco X50-5G no static routes?
2025-04-23 06:30:22 - last edited 2025-04-29 09:14:26

  @Joshude 

Hi, did you host a VPN server behind Deco X50-5G?

Most of the mobile service providers use CG-NAT services and assign a reserved IPV4 internet address. Do you want to set " Static Routes" for this matter?

 

And the 1.2.0 beta here has added " Static Routes"

Deco X50-5G_V1_1.2.0 with IoT and CPU Optimization

 

Thank you very much.

Best regards.

 

▶Check What's Currently Going on With Deco ▶Deco X50_V1_1.8.0 Significantly Expanded the Client Connection Details and Added Channel Selection ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
  0  
  0  
#2
Options
Re:Deco X50-5G no static routes?
2025-04-23 07:11:04

  @David-TP 

Thanks! I'm using Tailscale which is already setup and running. I had problems with CG-NAT in the past but with Tailscale that is no problem, fortunatly. 

 

Thanks for the 1.2.0 Beta hint, haven't seen that. Will give it a try even though the responses in the beta-thread don't all read very well.

 

 

  1  
  1  
#3
Options
Re:Deco X50-5G no static routes?
2025-04-23 07:40:47
Just upgraded to the 1.2.0 Build 20241230 Rel. 33540. Unfortunatly, there are no settings for static routes.
  0  
  0  
#4
Options
Re:Deco X50-5G no static routes?
2025-04-29 08:10:24

@David-TP Is there another firmware i've missed with the static routes available? 

  0  
  0  
#5
Options
Re:Deco X50-5G no static routes?
2025-04-29 09:20:07

  @Joshude 

Hi, no, I'm afraid there hasn't been a new firmware yet

I thought 1.2.0_Beta did, but apparently, it seems only under wireless router mode instead of 5G router mode.

Sorry for the inconvenience.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco X50_V1_1.8.0 Significantly Expanded the Client Connection Details and Added Channel Selection ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
  0  
  0  
#6
Options
Re:Deco X50-5G no static routes?
2025-09-24 20:35:28
Hi @David-TP, Is there any chance to have this enabled while using 5G? Main reason, I'm connecting two different LANs and X50-5G is my main router. I need to setup the static route in there, otherwise I might need to configure too many devices to handle the LAN gateway for each subnet... Thanks, very much appreciated!
  1  
  1  
#7
Options
Re:Deco X50-5G no static routes?
2025-09-24 21:22:26

I mean, I do understand that the limitation is more on the APP side than due to router config.

  0  
  0  
#8
Options
Re:Deco X50-5G no static routes?
2025-09-26 08:13:18 - last edited 2025-09-26 08:33:40

  @e3skudo 

Hi, thank you very much for the feedback.

I'm afraid there hasn't been a solution to allow Static Routing in 4G/5G router mode. It is more related to the Deco software, instead of the APP.

 

Given the repeated requests for this feature, would it be possible for you to send an email to support.forum@tp-link.com to explain in detail what you want to achieve via "Static Routing"? Perhaps, by providing concrete evidence of the necessity of this feature, we can request the senior engineer to prioritize obtaining a beta firmware version.

(Please add forum ID#806972 in the Subject)

 

Thanks a lot.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco X50_V1_1.8.0 Significantly Expanded the Client Connection Details and Added Channel Selection ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
  0  
  0  
#9
Options

Information

Helpful: 1

Views: 611

Replies: 8

Tags

Firmware Update
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.