Home Network Community > Deco > E4R - Upgrade from "another region" site? ..or not?
< Deco

E4R - Upgrade from "another region" site? ..or not?

E4R - Upgrade from "another region" site? ..or not?

E4R - Upgrade from "another region" site? ..or not?
E4R - Upgrade from "another region" site? ..or not?
2025-05-14 13:28:53 - last edited 2025-05-15 07:03:53
Tags: #Firmware Update
Model: Deco E4  
Hardware Version: V2
Firmware Version: 1.6.1 Build 20231227 Rel. 53644

Hello,

 

I have a set of Deco E4R. The device bellow says V2 but via web interface it says E4R(1.0). I thought I should upgrade to the latest firmware, for no reaons, and by checking I get this:

 

Firmware Version: 1.6.1 Build 20231227 Rel. 53644

Latest Firmware Version: 1.7.0 Build 20250116 Rel. 59369
 
When I go here in my Language version: https://www.tp-link.com/gr/support/download/deco-e4/v2/#Firmware
 
The latest firmaware I get is from 2024.
 
But then here in the English version: https://www.tp-link.com/en/support/download/deco-e4/v2/#Firmware

 

I can get the 2025 Firmware. The problem is I get a warnong message "Please upgrade firmware/software from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it may cause upgrade failure or mistakes and be against the warranty."

 

Should I continue with the upgrade or will it crush my Deco?

 

Thank you!

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:E4R - Upgrade from "another region" site? ..or not?-Solution
2025-05-15 03:51:33 - last edited 2025-05-15 07:03:53

  @BDKs 

Hi, if you go to Deco APP>More>System>Update Deco, can you detect a new version?

Occasionally, there would be an update delay on the local official website. You can manually update to 1.7.0 from the web UI, and if the version doesn't suit, the web UI will report an error and prevent the hardware from installing the incorrect firmware.

Thank you very much.

Best regards.

 

 

▶Check What's Currently Going on With Deco ▶Parental Control Upgrade on HomeCare Models ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
Recommended Solution
  2  
  2  
#2
Options
2 Reply
Re:E4R - Upgrade from "another region" site? ..or not?-Solution
2025-05-15 03:51:33 - last edited 2025-05-15 07:03:53

  @BDKs 

Hi, if you go to Deco APP>More>System>Update Deco, can you detect a new version?

Occasionally, there would be an update delay on the local official website. You can manually update to 1.7.0 from the web UI, and if the version doesn't suit, the web UI will report an error and prevent the hardware from installing the incorrect firmware.

Thank you very much.

Best regards.

 

 

▶Check What's Currently Going on With Deco ▶Parental Control Upgrade on HomeCare Models ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
Recommended Solution
  2  
  2  
#2
Options
Re:E4R - Upgrade from "another region" site? ..or not?
2025-05-15 06:23:55

  @David-TP 

 

I did the upgrade through the app and it works fine.

 

Thank you so much!

  1  
  1  
#3
Options

Information

Helpful: 0

Views: 348

Replies: 2

Tags

Firmware Update
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.