New Tp-ink Archer C50 AC1200 don't work.
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Just buy new Archer c50 AC1200 and try to turn on for first time.
Power led is blinking and router not working.
Check power cables everything is fine.
Can you give me a hint or I need to back the product?
Thanks
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @HristoDun,
Welcome to our community.
For your issue, is the power light blinking and other lights off? Or please tell me which lights are on and what is the LED status?
Here are some tips for you if your router's LED is abnormal or not working properly:
1. For No LED on issue (all LEDs off):
1) Make sure the "LED Control" feature is disabled.
2) Make sure the power source of the Router is working properly, try using another power socket or power adapter.
2. For Ethernet LED not on issue:
1) If the Ethernet LED is off even when a device is connected, it means that the port might be broken.
2) Please try a few more Ethernet cables and other Ethernet ports on the Router for a comparison, if you are certain that the port is broken, please contact TP-Link support for warranty.
3. For wireless LED not on issue:
1) Ensure Wi-Fi button/switch is turned on.
2) Go to the router's web management interface > Wireless, make sure the wireless radio is enabled.
Best Regards~
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi @HristoDun,
Welcome to our community.
For your issue, is the power light blinking and other lights off? Or please tell me which lights are on and what is the LED status?
Here are some tips for you if your router's LED is abnormal or not working properly:
1. For No LED on issue (all LEDs off):
1) Make sure the "LED Control" feature is disabled.
2) Make sure the power source of the Router is working properly, try using another power socket or power adapter.
2. For Ethernet LED not on issue:
1) If the Ethernet LED is off even when a device is connected, it means that the port might be broken.
2) Please try a few more Ethernet cables and other Ethernet ports on the Router for a comparison, if you are certain that the port is broken, please contact TP-Link support for warranty.
3. For wireless LED not on issue:
1) Ensure Wi-Fi button/switch is turned on.
2) Go to the router's web management interface > Wireless, make sure the wireless radio is enabled.
Best Regards~
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 283
Replies: 2
Voters 0
No one has voted for it yet.