Home

Forums

Stories

Knowledge Base

Home Network Community > Deco > Impossible enter in web page config on Deco

< Deco

Impossible enter in web page config on Deco

Hispanico

2025-05-20 06:49:35 - last edited 2025-05-21 06:19:34

Posts: 66

Helpful: 25

Solutions: 2

Stories: 0

Registered: 2022-11-12

Impossible enter in web page config on Deco

2025-05-20 06:49:35 - last edited 2025-05-21 06:19:34

Model: Deco X50

Hardware Version: V1

Firmware Version: V1.20_1.4.5 Build 20240828

I'm trying to enter the configuration page through the browser but despite giving it the correct password it doesn't enter the main deco 192.168.0.156, while this doesn't happen with the other decos on the network for example 192.168.0.104.
I tried other browsers but I didn't find a solution

Thank

Hispa

1 Accepted Solution

Hispanico

LV2

2025-05-21 05:50:19 - last edited 2025-05-21 06:19:34

Posts: 66

Helpful: 25

Solutions: 2

Stories: 0

Registered: 2022-11-12

Re:Impossible enter in web page config on Deco-Solution

2025-05-21 05:50:19 - last edited 2025-05-21 06:19:34

@David-TP

Thank

I solved. Power-off unit and power-on again and now finally i can enter in web config of principal Deco

Hispa

Recommended Solution

4 Reply

Carl

2025-05-20 14:56:47

Posts: 3932

Helpful: 1230

Solutions: 88

Stories: 25

Registered: 2018-11-01

Re:Impossible enter in web page config on Deco

2025-05-20 14:56:47

@Hispanico

Try the link in this FAQ. However please note that the Web UI does not allow any management or configuration. Its for diagnositc purposes, such as looking at the network map or installing firmware manually. There is no management or configuration tools available

What's New? Sync Your Tapo Doorbell and Door Lock Optimize Your Network with the Wi-Fi Toolkit App Join our Official Subreddits: r/tplink, r/tapo, and r/omada_networks

Hispanico

LV2

2025-05-20 15:39:43 - last edited 2025-05-20 16:24:22

Posts: 66

Helpful: 25

Solutions: 2

Stories: 0

Registered: 2022-11-12

Re:Impossible enter in web page config on Deco

2025-05-20 15:39:43 - last edited 2025-05-20 16:24:22

@Hispanico

Sry also following FAQ not solved, i have 6 DECO X50:

192.16.0.156 deco X50 ver. 1.2 firm. 1.4.5 (HOME)

192.16.0.008 deco X50 ver. 1.2 firm. 1.4.5

192.16.0.146 deco X50 ver. 1.0 firm. 1.6.7

192.16.0.009 deco X50 ver. 1.2 firm. 1.4.5

192.16.0.104 deco X50 ver. 1.0 firm. 1.6.7

192.16.0.007 deco X50 ver. 1.2 firm. 1.4.5

i can enter in all excluding 192.168.0.156 (HOME)

So with app i can see my 192.16.0.156 deco X50 ver. 1.2 firm. 1.4.5 (HOME) has and upgrade but download failed so is impossible update it:

PLS how solve ?

Hispa

David-TP

2025-05-21 04:06:09

Posts: 15744

Helpful: 2271

Solutions: 2150

Stories: 9

Registered: 2020-04-14

Re:Impossible enter in web page config on Deco

2025-05-21 04:06:09

@Hispanico

Hi, 1.6.7 is the latest firmware version for Deco X50_V1.2, and 1.4.5 is the latest version for Deco X50-V1.2. Currently, all your Deco units are up-to-date.

Based on the IP addresses, you might configure the Deco in "Access Point" mode.

I think you can refer to this link to set a different unit as the main Deco(you can pick up the "192.16.0.146 deco X50 ver. 1.0 firm. 1.6.7" ) to see whether the login issue always follows the main Deco unit:

How to replace the main Deco with another Deco

Wait for your reply.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Boost Your Network Performance with the Latest Realtek AX/AXE Adapter Driver ▶Deco M5 Newly Introduced Advanced Parental Control Features Try to leave a Message if urgent help is required.