TP-Link Community > Tapo Smart Camera > Tapo TC40 connectivity
< Tapo Smart Camera

Tapo TC40 connectivity

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Tapo TC40 connectivity

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Tapo TC40 connectivity
Tapo TC40 connectivity
2025-05-20 16:20:21 - last edited 2025-06-11 09:04:44
Model: TC40  
Hardware Version:
Firmware Version:

I've just installed my second Tapo TC40 camera which is OK but when I try to set the pan/tilt default view I get a message saying "operation failed, try again later". It's the same with setting sensitivity, etc.

Thanks for any advice

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Tapo TC40 connectivity-Solution
2025-05-21 03:51:31 - last edited 2025-06-11 09:04:44

  @mandjrawsthorne 

 

  • Check if there are errors when adjusting other camera features. 
  • Make sure the Tapo app and the camera firmware are both updated. How to update the firmware of the Tapo devices on the Tapo App
  • Test whether the control works when your phone connects to the same local WiFi as the camera. To avoid network switching and interference, disable cellular data and turn off VPN during the test.
  • Try to restart the camera. Force-close and reopen the app, then try again.

 

▶ Tapo P110M Matter 1.3 Release Energy Monitoring through Matter ▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub ▶ First Smart Switch Module! Tapo S112 Smart Switch Module with Roller and Switch Dual Modes ▶ Tapo Camera Image Style & Image Brightness Try out a different image style for your camera!
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Tapo TC40 connectivity-Solution
2025-05-21 03:51:31 - last edited 2025-06-11 09:04:44

  @mandjrawsthorne 

 

  • Check if there are errors when adjusting other camera features. 
  • Make sure the Tapo app and the camera firmware are both updated. How to update the firmware of the Tapo devices on the Tapo App
  • Test whether the control works when your phone connects to the same local WiFi as the camera. To avoid network switching and interference, disable cellular data and turn off VPN during the test.
  • Try to restart the camera. Force-close and reopen the app, then try again.

 

▶ Tapo P110M Matter 1.3 Release Energy Monitoring through Matter ▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub ▶ First Smart Switch Module! Tapo S112 Smart Switch Module with Roller and Switch Dual Modes ▶ Tapo Camera Image Style & Image Brightness Try out a different image style for your camera!
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 732

Replies: 1

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.