Home Network Community > 5G/4G Routers > wan port tolan
< 5G/4G Routers

wan port tolan

wan port tolan

wan port tolan
wan port tolan
2025-05-23 15:30:18 - last edited 2025-06-23 01:47:58
Model: Archer NX200  
Hardware Version:
Firmware Version:

nx200 has two lan ports and one wan/lan port.

How can I change the wan/lan port to lan?

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:wan port tolan-Solution
2025-05-27 08:14:55 - last edited 2025-06-23 01:47:58

  @Lageri 

Hi, if NX200 is in 5G router mode, the WAN/LAN port would automatically work as a LAN port.

Best regards.

 

▶Check What's Currently Going on With Deco ▶Deco X50_V1_1.8.0 Significantly Expanded the Client Connection Details and Added Channel Selection ▶Deco X50/X55_V1.3_1.3.1 Introduced Channel Selection, WiFi Access Control and WireGuard VPN ▶Deco BE65_V2_1.2.10 New Firmware with Enhanced Stability & Interference Resistance ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
Recommended Solution
  0  
  0  
#2
Options
4 Reply
Re:wan port tolan-Solution
2025-05-27 08:14:55 - last edited 2025-06-23 01:47:58

  @Lageri 

Hi, if NX200 is in 5G router mode, the WAN/LAN port would automatically work as a LAN port.

Best regards.

 

▶Check What's Currently Going on With Deco ▶Deco X50_V1_1.8.0 Significantly Expanded the Client Connection Details and Added Channel Selection ▶Deco X50/X55_V1.3_1.3.1 Introduced Channel Selection, WiFi Access Control and WireGuard VPN ▶Deco BE65_V2_1.2.10 New Firmware with Enhanced Stability & Interference Resistance ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
Recommended Solution
  0  
  0  
#2
Options
Re:wan port tolan
2025-05-27 18:50:26

  @Lageri  Im  quite new with my ax200 so how can I be sure (where to look at) that the device is in 5G router mode?

  0  
  0  
#3
Options
Re:wan port tolan
2025-06-23 01:47:53

  @Lageri Hi, sorry for the delay.

You can refer to the following picture:

The WAN Priority here is "MBB".

Best regards.

▶Check What's Currently Going on With Deco ▶Deco X50_V1_1.8.0 Significantly Expanded the Client Connection Details and Added Channel Selection ▶Deco X50/X55_V1.3_1.3.1 Introduced Channel Selection, WiFi Access Control and WireGuard VPN ▶Deco BE65_V2_1.2.10 New Firmware with Enhanced Stability & Interference Resistance ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
  0  
  0  
#4
Options
Re:wan port tolan
2025-06-23 13:25:05

  @Lageri 

Hi there,

My corresponding page looks exactly alike.

Still I cant get any LAN signal through tat WAN/LAN3 port.

I stil wonder why?

  0  
  0  
#5
Options

Information

Helpful: 0

Views: 420

Replies: 4

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.