Connessione lenta

Connessione lenta

Connessione lenta
Connessione lenta
2025-05-29 20:35:50 - last edited 2025-06-23 01:40:53
Model: Archer MR600  
Hardware Version: V3
Firmware Version: 1.2.0 0.9.1 v0001.0 Build 240716 Rel.54691n

I have problem whit download, whit phone was 80/90 MB, whit modem Archer mr600 v3 was 10/15MB.... There Is a problem whit what???

  0      
  0      
#1
Options
1 Accepted Solution
Re:Connessione lenta-Solution
2025-05-30 03:29:34 - last edited 2025-06-23 01:40:53

  @Furittu 

Hi, have you tested the wireless speed when connected to the hotspot of the mobile phone with the same SIM card?

 

Usually, the 4G band used would affect the network speed. Did you check whether the mobile phone used the same LTE band?

How to check the 4G band working on our smartphones

 

Please also make sure the device is connected to 5 GHz, then change the 5 GHz wireless channel to 48/80MHz under web UI>Advanced>Wireless>Wireless settings>5GHz.

Thank you very much.

Best regards.

Recommended Solution
  0  
  0  
#2
Options
2 Reply
Re:Connessione lenta-Solution
2025-05-30 03:29:34 - last edited 2025-06-23 01:40:53

  @Furittu 

Hi, have you tested the wireless speed when connected to the hotspot of the mobile phone with the same SIM card?

 

Usually, the 4G band used would affect the network speed. Did you check whether the mobile phone used the same LTE band?

How to check the 4G band working on our smartphones

 

Please also make sure the device is connected to 5 GHz, then change the 5 GHz wireless channel to 48/80MHz under web UI>Advanced>Wireless>Wireless settings>5GHz.

Thank you very much.

Best regards.

Recommended Solution
  0  
  0  
#2
Options
Re:Connessione lenta
2025-05-31 13:22:52

  @Furittu 

 

rsrq  -19 (very poor)   SNR +16 (good)  is pretty weird.   You want rsrq -10 or better and if its on the edge constantly (-19)  then speed will suffer.

  0  
  0  
#3
Options