Home Network Community > Deco > Ethernet Backhaul
< Deco

Ethernet Backhaul

Ethernet Backhaul

Ethernet Backhaul
Ethernet Backhaul
2025-07-01 09:03:22 - last edited 2025-07-04 02:04:35
Tags: #Deco Ethernet Backhaul #Deco M9
Model: Deco X50  
Hardware Version:
Firmware Version: 1.4.5

Yesterday I installed a Deco M9 in our garden home, which has a long distance to te wireless network in our house. It's connected with the Deco x50 via a ethernet cable but it's not used? The internet speed is very slow if I'm connected via WiFi with de M9? If I take out the ethernet cable out of the M9 and put the ethernet cable directly into the computer the internet speed is fast? I'm not using IPTV, the cable is Cat 6 and, as I tested it with the computer, is working. Below it visible in red how the Deco's ar connected.

Why is the Deco M9 wireless connected with the Living Room Deco X50 instead of using the ethernet backhaul of the Dexo x50 Hallway?

  1      
 
  1      
 
#1
Options
1 Accepted Solution
Re:Ethernet Backhaul-Solution
2025-07-03 14:39:36 - last edited 2025-07-04 02:04:35

Hi  @David-TP,

 

I promised you to give you a heads up about the Ethernet backhaul. Today I received the new cat6 connectors and now it's working 😊.

 

The problem was caused by a bad or too slow connection.

 

Thanks.

Recommended Solution
  3  
  3  
#4
Options
3 Reply
Re:Ethernet Backhaul
2025-07-02 03:56:16

  @Mischa402 

Hi, can I have the firmware version of your Deco M9 Plus?

It is also suggested to install the 1.8.1 beta firmware here to see whether it helps:

https://community.tp-link.com/en/home/forum/topic/824212 

 

Wait for your reply.

Best regards.

▶Check What's Currently Going on With Deco ▶Parental Control Upgrade on HomeCare Models ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
  0  
  0  
#2
Options
Re:Ethernet Backhaul
2025-07-02 07:44:35

Hi   @David-TP 

 

Thanks for your reply, yesterday I tried it with a different Cat6 cable (a short one just to check) and then it automatically switched to Ethernet, so it should work.

 

I have a Cat6 cable to the garden home but I used Cat5 connectors, I already ordered new connectors which should arrive today. I first will give that a try and hopefully that will work 🙏🏻.

 

Thanks in advance and I'll keep you posted.

 

cheers

  1  
  1  
#3
Options
Re:Ethernet Backhaul-Solution
2025-07-03 14:39:36 - last edited 2025-07-04 02:04:35

Hi  @David-TP,

 

I promised you to give you a heads up about the Ethernet backhaul. Today I received the new cat6 connectors and now it's working 😊.

 

The problem was caused by a bad or too slow connection.

 

Thanks.

Recommended Solution
  3  
  3  
#4
Options

Information

Helpful: 1

Views: 251

Replies: 3

Tags

Deco Ethernet Backhaul
Deco M9
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.