Home Network Community > Wi-Fi Routers > MLO not working on all 3 bands 2.4, 5 and 6 GHz
< Wi-Fi Routers

MLO not working on all 3 bands 2.4, 5 and 6 GHz

MLO not working on all 3 bands 2.4, 5 and 6 GHz

MLO not working on all 3 bands 2.4, 5 and 6 GHz
MLO not working on all 3 bands 2.4, 5 and 6 GHz
2025-07-01 14:18:33 - last edited 2025-08-07 06:34:56
Tags: #MLO Network #Firmware Update #Wi-Fi 7
Model: Archer BE800  
Hardware Version: V1
Firmware Version: 1.2.4 Build 20250414 rel.18315(5553)

Confirmed that MLO is working fine with the following firmware version on the same client:

 

Firmware Version: 1.1.6 Build 20240808 rel.26673(5553)

Hardware Version: Archer BE800 v1.0

 

Could you please assist downgrading the Access Point from the current firmware version (1.2.4 Build 20250414 rel.18315(5553)) to 1.1.6 Build 20240808 rel.26673(5553)? This would be greatly helpful, as MLO testing is currently completely blocked due to this.

 

Looking forward your response 

 

Please find the Device Details below:

 

Network controller [0280]: Qualcomm Device [17cb:1107] (rev 01)

 

Operating System: Ubuntu 22.04.1 LTS

Kernel: Linux 5.15.24+

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:MLO not working on all 3 bands 2.4, 5 and 6 GHz-Solution
2025-07-03 09:16:31 - last edited 2025-08-07 06:34:56

Hi @ExplorerZone,

Welcome to our community.

 

Can you provide relevant screenshots with specific error messages? Please confirm again, did you use the same device to test before?

Please note that only Wi-Fi 7 clients can enjoy the benefits of the MLO network. As far as I know, Kernel: Linux 5.15.24+ should not support WiFi 7.

Check Out the Latest Posts: △ Pre-release Firmware for Archer AX50 Introduces New Parental Control Features and Enhancements △ Pre-release Firmware for Archer AX80 Supports EasyMesh in AP Mode, DoH/DoT, ECO Mode, and More △Introducing AI QoS: Elevate Your Gaming Experience on the Archer GE800 Gaming Router △Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN △ Tether KidShield Test Recruitment - Safeguarding Children's Online Experience
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:MLO not working on all 3 bands 2.4, 5 and 6 GHz-Solution
2025-07-03 09:16:31 - last edited 2025-08-07 06:34:56

Hi @ExplorerZone,

Welcome to our community.

 

Can you provide relevant screenshots with specific error messages? Please confirm again, did you use the same device to test before?

Please note that only Wi-Fi 7 clients can enjoy the benefits of the MLO network. As far as I know, Kernel: Linux 5.15.24+ should not support WiFi 7.

Check Out the Latest Posts: △ Pre-release Firmware for Archer AX50 Introduces New Parental Control Features and Enhancements △ Pre-release Firmware for Archer AX80 Supports EasyMesh in AP Mode, DoH/DoT, ECO Mode, and More △Introducing AI QoS: Elevate Your Gaming Experience on the Archer GE800 Gaming Router △Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN △ Tether KidShield Test Recruitment - Safeguarding Children's Online Experience
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 429

Replies: 1

Tags

MLO Network Firmware Update Wi-Fi 7
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.