Home Network Community > 5G/4G Routers > System log filled with Level: Error; Type: 4G messages
< 5G/4G Routers

System log filled with Level: Error; Type: 4G messages

System log filled with Level: Error; Type: 4G messages

System log filled with Level: Error; Type: 4G messages
System log filled with Level: Error; Type: 4G messages
2025-07-09 18:18:27 - last edited 2025-07-10 07:54:32
Model: Archer MR500  
Hardware Version: V1
Firmware Version: 1.10.0 0.9.1 v0001.0 Build 241219 Rel.42593n

For the past few weeks the system log is being filled with two repeated log entries -

 

ID Time Type Level Log Content
1 2025-07-09 19:00:33 4G Error Exception:get_dns_state fail
2 2025-07-09 19:00:33 4G Error Exception:fopen fail
3 2025-07-09 19:00:28 4G Error Exception:get_dns_state fail
4 2025-07-09 19:00:28 4G Error Exception:fopen fail
5 2025-07-09 19:00:23 4G Error Exception:get_dns_state fail
6 2025-07-09 19:00:23 4G Error Exception:fopen fail
7 2025-07-09 19:00:18 4G Error Exception:get_dns_state fail
8 2025-07-09 19:00:18 4G Error Exception:fopen fail

 

These two entries are written to the log every five seconds. I do not know what causes them. Other than this, the router seems to be working OK. I want to stop these entries from being written.

  0      
 
  0      
 
#1
Options
3 Reply
Re:System log filled with Level: Error; Type: 4G messages
2025-07-11 07:53:09

  @tpdigi 

Hi, thank you very much for the feedback.

I understand that error logs can be concerning, but they didn't include much useful information.

It's great that you are vigilant about monitoring your logs. Currently, they appear to be generated without impacting the functionality of the system. Rest assured, and I think there is no need to worry much about it.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
  0  
  0  
#2
Options
Re:System log filled with Level: Error; Type: 4G messages
2025-07-11 10:33:09 - last edited 2025-07-11 10:35:34

@David-TP Thank you for your re-assusrance. But most of the system log is filled with these error entries, This makes it very diffcult to review other entries in the log, particularly as these repeated error entries have a high severtity. I wish to know what might be causing them so I may stop them.

  0  
  0  
#3
Options
Re:System log filled with Level: Error; Type: 4G messages
2025-07-25 08:48:11 - last edited 2025-07-25 08:50:50

@David-TP Since messaging over a week ago I performed a factory reset of the router. Even after the reset, those two log entries are still added every five seconds.

  1  
  1  
#4
Options

Information

Helpful: 0

Views: 249

Replies: 3

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.