Home Network Community > Deco > Reseau faible et instable
< Deco

Reseau faible et instable

Reseau faible et instable

Reseau faible et instable
Reseau faible et instable
2025-07-26 15:39:33 - last edited 2025-08-01 08:46:35
Tags: #Network Connectivity
Model: Deco E4  
Hardware Version:
Firmware Version: 1.1.1.Build 20240104 Rel.55043

Bonjour,

J'ai acheté un wiffi tp-link AC 1200 Deco E4 (2-pack) pour renforcer la couverture des zones mortes.

Après l'installation de deco E4, les signaux de mes caméras restent faible comme avant, par contre l'application indique : Tout semble bon.

Comment je pourrai faire pour augmenter des signaux de mes caméras ?

 

Je n'arrive pas à téléphoner au service clients pour leur demander des conseils.

J'ai suivi leur instruction pour créer un compte pour avoir un ticket, mais j' n'arrive pas à me connecter.

 

Merci d'avance de votre aide

 

 

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Reseau faible et instable-Solution
2025-07-31 04:01:08 - last edited 2025-08-01 08:46:35

  @dream 

Hi, welcome to the community.

Deco E4_V4_1.1.1 supports "Connection Preference". You can refer to this link to make sure the WiFi camera has been connected to the nearest Deco node:

How to select a preferred signal source on the Deco App

 

By the way, Deco E4 also supports IOT network. 

It is also suggested to enable a 2.4GHz IOT network/WPA2 only to see whether it helps improve the wireless signal:

TP-Link IoT Network

 

Best regards.

▶Check What's Currently Going on With Deco ▶Deco X50_V1_1.8.0 Significantly Expanded the Client Connection Details and Added Channel Selection ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Reseau faible et instable-Solution
2025-07-31 04:01:08 - last edited 2025-08-01 08:46:35

  @dream 

Hi, welcome to the community.

Deco E4_V4_1.1.1 supports "Connection Preference". You can refer to this link to make sure the WiFi camera has been connected to the nearest Deco node:

How to select a preferred signal source on the Deco App

 

By the way, Deco E4 also supports IOT network. 

It is also suggested to enable a 2.4GHz IOT network/WPA2 only to see whether it helps improve the wireless signal:

TP-Link IoT Network

 

Best regards.

▶Check What's Currently Going on With Deco ▶Deco X50_V1_1.8.0 Significantly Expanded the Client Connection Details and Added Channel Selection ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 83

Replies: 1

Tags

Network Connectivity
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.