BE550, QoS + Flow Controller = huge bufferbloat

BE550, QoS + Flow Controller = huge bufferbloat

BE550, QoS + Flow Controller = huge bufferbloat
BE550, QoS + Flow Controller = huge bufferbloat
2025-08-15 07:05:44
Model: Archer BE550  
Hardware Version: V1
Firmware Version:

Hi, I have an asymmetric internet speed (2500/250). I wanted to limit the upload using QoS, but as a result, a very large bufferbloat (and jitter) appears in all checks. But I found that if I turn off the flow controller on LAN and WAN, then everything becomes normal. Therefore, I have a question to which I have not found a clear answer, is a flow controller needed at home? What is its role in TP-Link routers? Thanks.

  0      
  0      
#1
Options
7 Reply
Re:BE550, QoS + Flow Controller = huge bufferbloat
2025-08-19 02:35:25

Hello @AlexG1 ,

Welcome to our community.

We have reported the case to our support engineers, and they will likely contact you via email to continue troubleshooting your issue. Please check your email inbox and confirm.

 

  0  
  0  
#2
Options
Re:BE550, QoS + Flow Controller = huge bufferbloat
3 weeks ago

  @Joseph-TP I've the same issue after installing the latest firmware 1.1.4 Build 20250813 rel.41793(5553). I've 360Mbps upload and tried to use QoS to limit it to 350 MBps, the upload ping jump above 100ms. If I set the upload to 2500Mbps (port speed), the ping is better than idle ping. OoS was fine on the previous firmware.

  0  
  0  
#3
Options
Re:BE550, QoS + Flow Controller = huge bufferbloat
2 weeks ago

Hello@Holiday25 ,

Welcome to our community.

 

Where are you using the router?  Have you enabled Flow Controller? If yes,please disable it for a try.

 

 

 

  0  
  0  
#4
Options
Re:BE550, QoS + Flow Controller = huge bufferbloat
Thursday

  @Joseph-TP I would also like to know if having the flow controller disabled on the LAN and WAN causes problems on a home network.

  0  
  0  
#5
Options
Re:BE550, QoS + Flow Controller = huge bufferbloat
Friday

  @Flipe 

This post is a month old. We updated the firmware for Archer BE550 in September. Please update to the latest firmware for comparison. 

1.2.1 Build 20250813 rel.27119 for US version;

1.1.4 Build 20250813 rel.41793 for EU version.

  0  
  0  
#6
Options
Re:BE550, QoS + Flow Controller = huge bufferbloat
Friday

  @Joseph-TP, my be550 is V2.

  0  
  0  
#7
Options
Re:BE550, QoS + Flow Controller = huge bufferbloat
Yesterday

  @Flipe,

There's no explicit mention of a flow controller causing the issue.

I have replied to you in another post. It is recommended that you reply in a single post. In case I missed your reply.

  0  
  0  
#8
Options