Home Network Community > 5G/4G Routers > NX200 V2.0 Poor wifi range
< 5G/4G Routers

NX200 V2.0 Poor wifi range

NX200 V2.0 Poor wifi range

NX200 V2.0 Poor wifi range
NX200 V2.0 Poor wifi range
2025-08-18 07:17:40
Model: Archer NX200  
Hardware Version: V2
Firmware Version: Archer NX200(EU)_V2_240822 first firmware released
I have had a 5G modem for a couple of months and I noticed that the WiFi on both bands has a very low range, so I had to buy a RE505X repeater. My friends with the same modem with version 2.2 have excellent WiFi coverage. Is the difference due to the hardware or is it a firmware problem? 
is there a way to fix this?Thanks everyone in advance
  0      
 
  0      
 
#1
Options
7 Reply
Re:NX200 V2.0 Poor wifi range
3 weeks ago

  @Gianluca1976 

Hi, thank you very much for the feedback.

Can you share more details about the WiFi coverage of the Archer NX200? Or how do you test its WiFi coverage?

The same model with different hardware versions is almost equally matched in WiFi coverage.

It is also suggested to check the location of the Archer NX200 to make sure it is not covered and within clear sight.

 

Thanks a lot.

Wait for your reply.

▶Check What's Currently Going on With Deco ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
  0  
  0  
#2
Options
Re:NX200 V2.0 Poor wifi range
3 weeks ago

  @David-TP 

Hi, thanks for your reply. I tested the modem at my friend's house. His modem has a range from the second floor to the ground floor, while my modem barely reaches the first floor, obviously both were in the same location.
  1  
  1  
#3
Options
Re:NX200 V2.0 Poor wifi range
3 weeks ago

  @Gianluca1976 

Hi, thanks for the update.

Have you tried to manually set the WiFi channels for 2.4/5GHz:

Wait for your reply.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
  0  
  0  
#4
Options
Re:NX200 V2.0 Poor wifi range
3 weeks ago
Hi, thanks a lot for reply I tried to manually set the WiFi channels for 2.4/5GHz like in the pic but I don't see improving in WiFi coverage, also I set transmit power to High
  1  
  1  
#5
Options
Re:NX200 V2.0 Poor wifi range
3 weeks ago

  @Gianluca1976 

Hi, thank you very much for the update.

I'd like to follow up on your case via email and ask the senior engineer for further assistance.

Please check whether you can receive my email later.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
  0  
  0  
#6
Options
Re:NX200 V2.0 Poor wifi range
2 weeks ago

  @David-TP 

Hi, thank you very much for the update and sorry for the delay in responding. I tried resetting the modem, but there's no improvement. The RE505X repeater was updated a few days ago and his connection is more stable now. I wanted to ask if it's possible to try the beta firmware for NX200, I found it on the forum (Archer_NX200(EU1)v2_1.0.0_3.0.0_UP_BOOT_beta_2025-06-16_10.56.34_dump) Is it safe? Thank you very much, and have a good evening.

  0  
  0  
#7
Options
Re:NX200 V2.0 Poor wifi range
2 weeks ago

  @Gianluca1976 

Hi, thanks for getting back to me.

I've received a new beta version for Archer NX200_V2, and I'll share it later via private message.

Maybe you can test the latest beta version first to see whether it helps.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
  0  
  0  
#8
Options

Information

Helpful: 0

Views: 336

Replies: 7

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.