BE230 Network Switching between 2.4ghz & 5ghz
Is there a way l can manually change a device between 2.4ghz to 5ghz? The problem l am having is my Wifi Printer automatcially connects to 2.4ghz and my laptop automatically connects to 5ghz and my laptop shows the printer as offline (even thou its not as l can print documents from my ipad) The other day my laptop automatically switched from 5ghz to 2.4ghz and the print then showed as online from the laptop.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @melgippo,
Thanks for getting back to me.
Do you mean the printer was connected to the IoT network before? If you change it to the 2.4Ghz of the main network, can it access the laptop?
Have you also checked the AP isolation feature? Please confirm it is disabled.
In addition, please set the main network's SSID to be different from the IoT network.
- Copy Link
- Report Inappropriate Content
Hello@melgippo ,
Welcome to our community.
Have you enabled the guest network before? Please confirm that both the printer and laptop are connected to the main network.
Then, please check if the AP isolation is enabled. If yes, disable it.
- Copy Link
- Report Inappropriate Content
Hi @Joseph-TP
Thanks for replying.
No, l have not enabled the guest network. I did enable the IoT Network.
Thanks
Mel
- Copy Link
- Report Inappropriate Content
Hi @melgippo,
Thanks for getting back to me.
Do you mean the printer was connected to the IoT network before? If you change it to the 2.4Ghz of the main network, can it access the laptop?
Have you also checked the AP isolation feature? Please confirm it is disabled.
In addition, please set the main network's SSID to be different from the IoT network.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 290
Replies: 3
Voters 0
No one has voted for it yet.