Home Network Community > Wi-Fi Routers > BE230 Network Switching between 2.4ghz & 5ghz
< Wi-Fi Routers

BE230 Network Switching between 2.4ghz & 5ghz

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

BE230 Network Switching between 2.4ghz & 5ghz

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
BE230 Network Switching between 2.4ghz & 5ghz
BE230 Network Switching between 2.4ghz & 5ghz
2025-08-19 02:05:09 - last edited 2025-09-14 09:29:13
Tags: #Network Connectivity #Bandwidth Control/QoS
Model: Archer BE230  
Hardware Version: V1
Firmware Version: 1.1.4 Build 20250318 rel.31873

Is there a way l can manually change a device between 2.4ghz to 5ghz? The problem l am having is my Wifi Printer automatcially connects to 2.4ghz and my laptop automatically connects to 5ghz and my laptop shows the printer as offline (even thou its not as l can print documents from my ipad) The other day my laptop automatically switched from 5ghz to 2.4ghz and the print then showed as online from the laptop.

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:BE230 Network Switching between 2.4ghz & 5ghz-Solution
2025-08-22 07:57:54 - last edited 2025-09-14 09:29:13

Hi @melgippo,

Thanks for getting back to me.

 

Do you mean the printer was connected to the IoT network before? If you change it to the 2.4Ghz of the main network, can it access the laptop?

Have you also checked the AP isolation feature? Please confirm it is disabled.

 

In addition, please set the main network's SSID to be different from the IoT network.

 

Welcome to Community！ Check Out the Latest Posts: △New Firmware for Archer GE550/GE650 V1 Introduces AI-QoS, EasyMesh IoT Expansion, and More! △New Firmware for Archer BE800 V1 to Support VPN Merge, EasyMesh Guest/IoT Extend, and More △New Firmware Releases for Archer BE805/BE450 V1 to Support VPN Merge, New ECO Mode, and More △New Firmware for Archer BE400 V1 to Support IPv6 VPN, And More Click △Helpful Or ☆Recommended Solution if the post/answer helps.
Recommended Solution
  0  
  0  
#4
Options
3 Reply
Re:BE230 Network Switching between 2.4ghz & 5ghz
2025-08-20 08:11:33

Hello@melgippo ,

Welcome to our community.

 

Have you enabled the guest network before? Please confirm that both the printer and laptop are connected to the main network.

Then, please check if the AP isolation is enabled. If yes, disable it.

 

Welcome to Community！ Check Out the Latest Posts: △New Firmware for Archer GE550/GE650 V1 Introduces AI-QoS, EasyMesh IoT Expansion, and More! △New Firmware for Archer BE800 V1 to Support VPN Merge, EasyMesh Guest/IoT Extend, and More △New Firmware Releases for Archer BE805/BE450 V1 to Support VPN Merge, New ECO Mode, and More △New Firmware for Archer BE400 V1 to Support IPv6 VPN, And More Click △Helpful Or ☆Recommended Solution if the post/answer helps.
  0  
  0  
#2
Options
Re:BE230 Network Switching between 2.4ghz & 5ghz
2025-08-21 09:00:48

  Hi @Joseph-TP 

 

Thanks for replying.

 

No, l have not enabled the guest network. I did enable the IoT Network. 

 

Thanks

Mel

  0  
  0  
#3
Options
Re:BE230 Network Switching between 2.4ghz & 5ghz-Solution
2025-08-22 07:57:54 - last edited 2025-09-14 09:29:13

Hi @melgippo,

Thanks for getting back to me.

 

Do you mean the printer was connected to the IoT network before? If you change it to the 2.4Ghz of the main network, can it access the laptop?

Have you also checked the AP isolation feature? Please confirm it is disabled.

 

In addition, please set the main network's SSID to be different from the IoT network.

 

Welcome to Community！ Check Out the Latest Posts: △New Firmware for Archer GE550/GE650 V1 Introduces AI-QoS, EasyMesh IoT Expansion, and More! △New Firmware for Archer BE800 V1 to Support VPN Merge, EasyMesh Guest/IoT Extend, and More △New Firmware Releases for Archer BE805/BE450 V1 to Support VPN Merge, New ECO Mode, and More △New Firmware for Archer BE400 V1 to Support IPv6 VPN, And More Click △Helpful Or ☆Recommended Solution if the post/answer helps.
Recommended Solution
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 831

Replies: 3

Tags

Network Connectivity Bandwidth Control/QoS
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.