XX530v is capped at 50Mb download in a 500Mb plan
I installed this device in my house, put fiber directly on it, it registered without issues.
But I noticed a odd issue:
Any download is always capped at 50Mb/s (my plan is 500Mb/s for both downloads and uploads), but UPLOADS happen at full speed (500Mb/s).
I tried some troubleshooting but nothing seems to work!
If I return to the old ONU I was using, it downloads at full 500Mb/s (ONU in bridge mode and XX530v connecting via PPPoE).
As soon as I return the fiber cable to XX530v, the problem happens again.
I suspect it might have to do with firmware (I've updated it to latest firmware), but the problem is I can't find the original firmware that came with it (Firmware Version:0.4.0 3.0.0 v6096.0 Build 240426 Rel.38762n).
ISP told me this router is compatilble, and they advised me to contact TP LINK, which I'm doing, because it might be a software fault on device's side.
Local TP Link support couldn't help me. They just say the same old stuff like "this router is targeted to ISP, so ISP has to help you... etc etc etc".
It seems this is a secret device only ISPs have access.
I mean, come ou guys! This router is sold in many places, and we currently can buy it from stores and install it ourselves.
TP LINK has to support this device because it's sold to end users!
My network already directed me to contact Tp Link, so I demand a solution!
And my ISP is very open, you only need the right GPON SERIAL to connect. Pratically any device can be used in their network as long as the GPON SN is right.
I even tried another ONU (different from the original) and no problem with it as well.
There was even a similar topic in this forums with the EXACT SAME PROBLEM.
GPON XX530v V1 - Download speed limited to less than 50MB
Can anyone escalate it to engineers?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Aman_1829 Kindly use the beta firmware provided in the pinned section, do a full reset (including GPON parameters), reconfigure the settings, and keep DFS off (use only upto 80MHz channel range and 36-48/149-165 channel numbers). Then test and report your findings. It's not anything JioFiber related, it's just DFS acting up sometimes.
@Kevin_Z I also request to add regdomain change (FCC, ETSI or country-wise (US, CA, RU, UK etc)) in both 2.4 and 5GHz, so that it can be set region-wise and used to the fullest (some regions like panama has no DFS scan, so it's the fastest for them and some don't allow DFS to be used at all)
- Copy Link
- Report Inappropriate Content
@Kevin_Z having Epon registration problem.need to reboot router manually
- Copy Link
- Report Inappropriate Content
@IfranAli it didn't work, 5Ghz still causing issue
- Copy Link
- Report Inappropriate Content
XX230V V1 and XX530V V2 still with these same problems!
- Copy Link
- Report Inappropriate Content
@Kevin_Z Hi, for the model xx530v v1, this firmware solve the problem. but i have others devices with models xx230v v1 and xx530v v2 with the same problem. have a version of firmware for theses devices? thanks for your help.
- Copy Link
- Report Inappropriate Content
@jrandis Tão simples resolver isso, ja tem a atualização base pronta, não precisa criar uma do zero, só copiar e colar, eu mesmo sem experiência conseguiria fazer isso, porém acho uma falta de respeito por parte da tplink resolver isso de forma rapida
- Copy Link
- Report Inappropriate Content
@Kevin_Z Amigo, ajuda nos !!!
- Copy Link
- Report Inappropriate Content
@Kevin_Z Please provide us with the updated firmware for the xx230v version V1, including the fix so that the download is no longer limited to 50MB.
- Copy Link
- Report Inappropriate Content
jrandis wrote
@Kevin_Z Hi, for the model xx530v v1, this firmware solve the problem. but i have others devices with models xx230v v1 and xx530v v2 with the same problem. have a version of firmware for theses devices? thanks for your help.
Thanks for your follow-up on this topic.
I've updated and provided a pre-release firmware for XX530v V2 in my response here. Please check:
https://community.tp-link.com/en/home/forum/topic/839982?replyId=1675476
- Copy Link
- Report Inappropriate Content
Lekao wrote
@jrandis Tão simples resolver isso, ja tem a atualização base pronta, não precisa criar uma do zero, só copiar e colar, eu mesmo sem experiência conseguiria fazer isso, porém acho uma falta de respeito por parte da tplink resolver isso de forma rapida
Please check this response or your new post here.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 14635
Replies: 112
Voters 0
No one has voted for it yet.