My main 5ghz wifi has extremely low speeds, and my 5ghz iot wifi has expected speeds
The subject pretty much says it all. I've tested on multiple devices, tried disabling QoS, tried having only one device connected to the wifi, tried different channels, Smart Connect, OFDMA, TWT are disabled. The main wifi's speed is ~65 mpbs, while the IoT one's is more like ~800 mbps.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Kostia16384 The solution was to enable the WMM. Thanks for help here!
- Copy Link
- Report Inappropriate Content
Hello @Kostia16384 ,
Thanks for contacting our community.
Please check the link speed of the main 5G WiFi: How to check the associated/link speed on a wireless client.
Please Change channel width to avoid interference.You may refer to Changing Channel and Channel Width on a TP-Link Router (new logo).
For 2.4GHz wireless client devices, adjust the 2.4GHz channel width to 20MHz; for 5 GHz wireless client devices, adjust the 5GHz channel width to 80MHz or 40MHz, etc.
Best Regards.
- Copy Link
- Report Inappropriate Content
@Joseph-TP Thanks for your advice. The uplink speed is 2.4Gbps for both WiFis. I've tried every single option for the channel up to 64 (my devices couldn't detect the wifi past that option) (even though, according to my laptop, both WiFis operate on the same channel). I've also tried changing the channel width from 20/40/80/160 MHz down to 20/40 MHz. Both options made the connection worse.
- Copy Link
- Report Inappropriate Content
Hi@Kostia16384 ,
Thanks for getting back to me.
When you tested the link speed, have you confirmed that the Smart Connect is disabled? And the test client is always connected to the 5G main network?
Also, check if you have VPN enabled. For comparison purposes, disable VPN.
Best Regards.
- Copy Link
- Report Inappropriate Content
@Joseph-TP Yes, the Smart Connect has always been disabled on my router. The test client was always connected to the network I was testing at the moment, no interruptions. VPN was disabled both on the router and on the device.
- Copy Link
- Report Inappropriate Content
The tech team has been made aware of your case; they will likely reach out to you via email to continue troubleshooting. Please check your email inbox and confirm.
- Copy Link
- Report Inappropriate Content
@Joseph-TP Thank you. I've received an email stating that the case was escalated to tp-link engineers.
- Copy Link
- Report Inappropriate Content
Hi@Kostia16384 ,
Got it. If you get any solutions, please feel free to share them here.
- Copy Link
- Report Inappropriate Content
@Kostia16384 The solution was to enable the WMM. Thanks for help here!
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 193
Replies: 8
Voters 0
No one has voted for it yet.