Does anyone know where the killswitch is in the BE550 /BE9300 becouse since 1.2.1 my openvpn does connect but i cant get any local server conecction. it seems that it´s all blockt accapt the i-net. before update it all works as it should. thanks for any hint. HW ist ein archer BE550 v1.0 now with

  @Smilie108 

Hi,

The VPN Kill Switch is a feature of the router's VPN Client. If you are talking about the VPN Server, then this will not affect you.

  @woozle thanks but then is the question why the vpn via openvpn can connect but i can´t get date over it. This happens after firmeware. The openvpn clienet concets i can see the ip in teh routers vpn server connection list but i can´t get anything to talk with me or access any local device ( server) via open vpn neither the i-net is working the setting is follow.

this workt before update firmeware now a can´t connect anything via openvpn. the connection itself is connetcted correctly
Any hint? 

Thx forward 

  @Smilie108 

I've just tested the OpenVPN Server myself on my BE550 V1 with firmware 1.2.1 and it works fine for me. I am using the same settings for the OpenVPN Server like you (which are the default settings).

However, I must point out that I have already done what I always do whenever a major new firmware version comes along, which is to perform a factory reset and then configure all the settings of the router again from scratch. I didn't test OpenVPN right after the firmware update.

  @woozle mhm but when i reset i have to update all vpn clients or ? the key will change or ? 

  @Smilie108 

Yes, the key and certificate will change and you have to update all clients.

  @woozle mhm thats not so simple ;) ok thx