Solution Weather Location Option Is Not Available on Archer BE800's Web UI After Updating to 1.3.1
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Updated December 10, 2025:
Official versions 1.3.2 Build 20251015 (Non-EU) and 1.3.2 Build 20251015 (EU) are being released gradually. Users can check for updates through your router's web interface or the Tether App and manually install the latest version.
If you cannot find the latest version, please download the firmware from the official website and upgrade manually:
https://www.tp-link.com/support/download/archer-be800/v1/#Firmware
We will manually lock this thread to better focus on discussions about the new firmware. We also encourage all users to upgrade to the latest firmware for testing and to provide feedback. You can Start a New Thread here.
---------------------------------------------------------------------------------
This Article Applies to:
Archer BE800(EU)_V1_1.3.1 Build 20250724 rel.34636
Phenomenon:
We have received reports from some users that after updating their Archer BE800(EU)_V1 to firmware 1.3.1, the location option for the Weather settings is no longer available in the Web UI. Though it still displays normally in the Tether App.
marto74bg first reported it in this thread.
Available Solutions:
Currently, we have two solutions available to resolve the abnormal display.
Solution 1:
The Tether App's location option still displays normally. It is recommended that you temporarily set and manage the location option through the Tether App.
Solution 2:
Our R&D team has also provided a beta firmware to resolve this abnormal display. Furthermore, this firmware has been verified by marto74bg.
Please install and upgrade the beta firmware for the Archer BE800, then test whether the location option can be displayed again:
| Model | Direct Download Link |
| Archer BE800(EU)_V1_1.3.1 | Archer BE800(EU)_V1_1.3.99 Beta |
Note:
1. Please be sure you have read the Terms and Conditions for TP-Link Beta Firmware before proceeding.
2. Updating firmware, please refer to How to upgrade the firmware on the TP-Link Wi-Fi Routers.
If it doesn’t help, please ensure the firmware has been downloaded correctly and updated successfully.
For additional feedback, please feel free to add it here at any time. Screenshots of any error messages displayed on the Web UI will be helpful.
We appreciate your support.