Home Network Community > 5G/4G Routers > MR200 - External Antenna Modification
< 5G/4G Routers

MR200 - External Antenna Modification

MR200 - External Antenna Modification

MR200 - External Antenna Modification
MR200 - External Antenna Modification
2025-09-23 11:24:51 - last edited Friday
Tags: #Antennas #Antenna
Model: Archer MR200  
Hardware Version: V7
Firmware Version: 1.0.0 0.9.1 v0001.0 Build240626 Rel 34805n

I have recently purchased MR200 4G LTE wifi Router for my farm house. I'm planning to extending the range with External antenna LPDA or Omnidirectional antenna for both LTE and wifi signal. The WIFI router comes with 2 removal external antenna and 2 internal PCB antenna soldered build-in to the router. Now, list the questions.

 

1. Both removal external antenna are only for LTE signal?

2. which Internal pcb antenna is for 2.4Ghz and 5Ghz? 

 

The information will help me to plan and make modification to the router for my use.
 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:MR200 - External Antenna Modification-Solution
3 weeks ago - last edited Friday

  @Purusotaman 

Sorry for the delay. Can I have a picture of the circuit board with 2 PCB antennas?

There is no information on this detail, and I don't know the answer either.

May I know why you need to know this information, as I might need to further check the senior engineer later?

 

Thank you very much.

Best regards.

 

 

▶Check What's Currently Going on With Deco ▶Parental Control Upgrade on HomeCare Models ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
Recommended Solution
  0  
  0  
#5
Options
4 Reply
Re:MR200 - External Antenna Modification
3 weeks ago

  @Purusotaman 

Hi, welcome to the community.

Yes, both removal external antennas are for LTE signal.

For the internal PCB antennas, did you dismantle the hardware?

 

Wait for your reply.

Best regards.

▶Check What's Currently Going on With Deco ▶Parental Control Upgrade on HomeCare Models ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
  0  
  0  
#2
Options
Re:MR200 - External Antenna Modification
3 weeks ago - last edited 3 weeks ago

Hi David,

Thanks for the response,

yes, I have dismantled the hardware.

 

Regard, Purusotaman

  0  
  0  
#3
Options
Re:MR200 - External Antenna Modification
3 weeks ago

 

Purusotaman wrote

Hi David,

Thanks for the response,

yes, I have dismantled the hardware.

 

Regard, Purusotaman

 

Waiting for the Information.....

  0  
  0  
#4
Options
Re:MR200 - External Antenna Modification-Solution
3 weeks ago - last edited Friday

  @Purusotaman 

Sorry for the delay. Can I have a picture of the circuit board with 2 PCB antennas?

There is no information on this detail, and I don't know the answer either.

May I know why you need to know this information, as I might need to further check the senior engineer later?

 

Thank you very much.

Best regards.

 

 

▶Check What's Currently Going on With Deco ▶Parental Control Upgrade on HomeCare Models ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
Recommended Solution
  0  
  0  
#5
Options

Information

Helpful: 0

Views: 639

Replies: 4

Tags

Antennas
Antenna
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.