Home Network Community > Deco > Remove network
< Deco

Remove network

Remove network

Remove network
Remove network
Thursday - last edited Friday
Tags: #Network Connectivity
Model: Deco M4  
Hardware Version:
Firmware Version:

Can you advise how to remove a Deco network (M4) so I can set up a new Deco network (X10 mesh) using same credentials as the old network. 
thanks

  1      
 
  1      
 
#1
Options
1 Accepted Solution
Re:Remove network-Solution
Friday - last edited Friday

  @Ronata 

Hi, you can use "Replace Main Deco" under "+" on the top right. It will save the network SSID and credentials of the old network.

Replace Main Deco - Migrate Network with One Tap in the Deco APP

Best regards.

 

▶Check What's Currently Going on With Deco ▶Parental Control Upgrade on HomeCare Models ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Remove network-Solution
Friday - last edited Friday

  @Ronata 

Hi, you can use "Replace Main Deco" under "+" on the top right. It will save the network SSID and credentials of the old network.

Replace Main Deco - Migrate Network with One Tap in the Deco APP

Best regards.

 

▶Check What's Currently Going on With Deco ▶Parental Control Upgrade on HomeCare Models ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 1

Views: 36

Replies: 1

Tags

Network Connectivity
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.