Home Network Community > Deco > Port forwarding not working
< Deco

Port forwarding not working

Port forwarding not working

Port forwarding not working
Port forwarding not working
3 weeks ago - last edited 3 weeks ago
Tags: #Port Forwarding
Model: Deco X50-5G  
Hardware Version: V1
Firmware Version: 1.3.0

Hi,

 

port forwarding is not working on the X50-5G (v1.20).

 

I can ping the router from external but no connectivity on ofrwared ports. Using nmap to check the ports they show up as "filtered".

Internet provider issue can be ruled out as VPN server on the router is accable from outside.

 

I have also used APN with "IPv4" only and "IPv4&IPv6" so far.

Any other idea which settings could cause this odd behavior?

 

Thanks

  1      
 
  1      
 
#1
Options
3 Reply
Re:Port forwarding not working
3 weeks ago

  @saittam 

Hi, may I know your mobile service provider?

Which device do you want to open ports for?

  • Can you access this device from the local network?

Is the current IPV4 WAN IP address on the Deco App the same as the IP address here:https://whatismyipaddress.com

 

Wait for your reply.

Best regards.

 

 

▶Check What's Currently Going on With Deco ▶Deco X50_V1_1.8.0 Significantly Expanded the Client Connection Details and Added Channel Selection ▶Deco X50/X55_V1.3_1.3.1 Introduced Channel Selection, WiFi Access Control and WireGuard VPN ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
  0  
  0  
#2
Options
Re:Port forwarding not working
3 weeks ago

  @David-TP Hi David,

 

Thanks for your quick replay.

 

  • My provider is A1 (Austria).

 

  • Yes, I can access the devices from local network:

22/tcp   filtered ssh                   -> connected via WIFI and open from local network
1194/tcp open     openvpn      -> setup on x50-5g: open external and internal
5000/tcp filtered upnp               -> connected via LAN and open from internal 
 

  • The Deco app shows the same IP (46.x.x.73) as whatismyipaddress.com reports.

 

Best regards.

  1  
  1  
#3
Options
Re:Port forwarding not working
2 weeks ago

  @saittam 

Hi, if you enabled "UPNP" under NAT forwarding, will "Port 5000/tcp " show as "Open"?

As for the SSH, Deco seems to have disabled SSH remote management by default, and port 22 is reserved for the Deco APP only.

Wait for your reply.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco X50_V1_1.8.0 Significantly Expanded the Client Connection Details and Added Channel Selection ▶Deco X50/X55_V1.3_1.3.1 Introduced Channel Selection, WiFi Access Control and WireGuard VPN ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
  0  
  0  
#4
Options

Information

Helpful: 1

Views: 154

Replies: 3

Tags

Port Forwarding
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.