Archer NX200 No GSM signal
Hi everyone
My 5G router has no signal with any simcard, when first time insert a simcard the simcard detected by modem and shows signal for a short time but then signal is lost and router says no simcard detected,
by manual search I can find the bands but after selection no Signal comes .
tried tonset APN manually but not helped.
I checked the router system log, it is recorded "registered in network" the chance the operator to 0.0 and simcard unplugged, then again simcard plugged and register again unplugged and finally stopped searching.
the router is a brand new and using for the first time.
Can any one helps me out.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, may I know your SIM ISP?
Did the SIM ISP only support a 2G/GSM network?
Have you tested it with any 4G/5G SIM cards?
Wait for your reply.
Best regards.
- Copy Link
- Report Inappropriate Content
The ISP is MCI with PLMN 43211.
tested with ISP with PLMN 43235 result was same.
The ISP supports all GSM networks 2G to 5G.
The SIM has 4G signal and working in MR-200 router.
- Copy Link
- Report Inappropriate Content
Hi, thank you very much for the update.
Did you purchase the Archer NX200 from the local market?
I don't find any details that Archer NX200 has ever been shipped to Iran. so it's very likely this model hasn't passed local tests.
If it didn't work, it is suggested to send it back to the shop retailer.
Thanks a lot.
Best regards.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 175
Replies: 6
Voters 1
