Devices not connecting to 2nd mesh device
I recently installed the first x50 - PoE with succes.
disabled the providers wifi and it works.
when I connect the second x50 - PoE it looks like everything is in order. The app even tells me everting works fine.
this is the case when I walk around with the IPad I used for installation.
However every other device sees the wifi from the second x50, but fails to connect. They all connect finewith the first.
Wat is happening?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@ARGamingPK1 seems like it has to do with the devices.
tablet, pc an one phone work.
3 other phones don't.
Turned of 5 GHz did not work
changed wifi password cause I had a "&" in it. Did not work
changed the wifi sec type. Did not work
fast roamng is off
devices haven't got static IP
the wifi signal is full
powercycle of the devices did nothing
Turned out that forgetting the network and reconnecting suddenly worked.
PROBLEM SOLVED
Thank you for thinking along.
- Copy Link
- Report Inappropriate Content
@Birdylaar You have to turn off Fast Roaming and Beamforming because some devices does'nt support Fast Roaming and Beam Forming.
- Copy Link
- Report Inappropriate Content
@ARGamingPK1 fastroaming was already turned off.
beamforming can't be switched on or off on this deco.
- Copy Link
- Report Inappropriate Content
@Birdylaar What's your hardware and firmware version? Kindly confirm it.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Birdylaar Hmm so after installation is done so your devices can't roam to nearest Deco or you not able to do installation?
- Copy Link
- Report Inappropriate Content
@ARGamingPK1 seems like it has to do with the devices.
tablet, pc an one phone work.
3 other phones don't.
Turned of 5 GHz did not work
changed wifi password cause I had a "&" in it. Did not work
changed the wifi sec type. Did not work
fast roamng is off
devices haven't got static IP
the wifi signal is full
powercycle of the devices did nothing
Turned out that forgetting the network and reconnecting suddenly worked.
PROBLEM SOLVED
Thank you for thinking along.
- Copy Link
- Report Inappropriate Content
@Birdylaar Don't turned ON Fast Roaming again because some older devices can't connect to WiFi when Fast Roaming is ON and because of that we have to forget wifi and reconnect it again they also mentioned in Deco App aswell.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 81
Replies: 7
Voters 0
No one has voted for it yet.