TP-Link Community > Kasa Smart Thermostat > How to turn off thermostats when away
< Kasa Smart Thermostat

How to turn off thermostats when away

How to turn off thermostats when away

How to turn off thermostats when away
How to turn off thermostats when away
a week ago
Tags: #Smart Control/Schedule #Temperature Calibration
Model: KE110  
Hardware Version: V1
Firmware Version: 1.1.0

Hello

I have two KE100s connected to a KE110. Smart Control is synchronized across all three. However, when I'm on the go and turn off the heating, it always turns itself back on as soon as the next sector from Smart Control kicks in. 

It doesn't matter what I do. If I turn off the power via the app, everything turns back on by itself when the next Smart Block starts up. And if I set the temperature automatically to 15 degrees and deactivate Smart Control, the heating still switches back on when the next sector starts. This is extremely annoying. 

Everything is synchronized, but I just can't manage to switch off the heating remotely permanently. Geofencing only works until the next time block is reached. 

  0      
 
  0      
 
#1
Options
3 Reply
Re:How to turn off thermostats when away
a week ago

  @PhobosDeimos1 

 

"And if I set the temperature automatically to 15 degrees and deactivate Smart Control, the heating still switches back on when the next sector starts."

> Did you do these two things together? Both automatically? Please note that the Smart Control feature can only be controlled manually, it is not a supported feature in automation.

▶ Tapo P110M Matter 1.3 Release Energy Monitoring through Matter ▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub ▶ First Smart Switch Module! Tapo S112 Smart Switch Module with Roller and Switch Dual Modes ▶ Tapo Camera Image Style & Image Brightness Try out a different image style for your camera!
  0  
  0  
#2
Options
Re:How to turn off thermostats when away
a week ago

  @Wayne-TP 

 

I've managed to do it now. The whole thing is a bit fiddly. Smart Control keeps taking over control as soon as the next block starts. It doesn't matter whether you turn off the heating, have geo-fencing activated, or enter that you want to switch Smart Control back on manually. No matter what you set, if Smart Control is activated, it always takes control again. The trick is to go to the gear icon and set it to continue Smart Control manually. Then, when you turn off the heating, it works.

 

It would be nice if you could simply set up a vacation function. To be honest, I don't know why that's so difficult.

 

 

  0  
  0  
#3
Options
Re:How to turn off thermostats when away
Wednesday

  @PhobosDeimos1 

 

Smart control is essentially a schedule feature. If you do not disable it, temporary manual adjustments to the device state will not interfere with upcoming scheduled settings. 

 

With the KE110, the new Hold Temperature feature allows you to configure how the TRV resumes Smart Control after a manual temperature adjustment. For example, automatically reverting to the Smart Control schedule after a set duration, resuming at the next scheduled time point, or only restoring when manually triggered.

▶ Tapo P110M Matter 1.3 Release Energy Monitoring through Matter ▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub ▶ First Smart Switch Module! Tapo S112 Smart Switch Module with Roller and Switch Dual Modes ▶ Tapo Camera Image Style & Image Brightness Try out a different image style for your camera!
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 30

Replies: 3

Tags

Smart Control/Schedule Temperature Calibration
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.