Home Network Community > 5G/4G Routers > MR100 4G Power Failure
< 5G/4G Routers

MR100 4G Power Failure

MR100 4G Power Failure

MR100 4G Power Failure
MR100 4G Power Failure
3 weeks ago - last edited 6 hours ago
Model: TL-MR100-Outdoor  
Hardware Version:
Firmware Version:

Does anyone know whether this product automatically powers on after a mains power failure? I have one installed in a remote property and National Grid have a power failure. Just wondering if I need to do a 16hr drive to press a button. 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:MR100 4G Power Failure-Solution
3 weeks ago - last edited 6 hours ago

  @StillPhone 

Hi, welcome to the community.

Did you use the DC power adapter or the original POE adapter?

There is no Power button on this router. It should automatically boot up after the power outage is restored.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco Wi-Fi Heatmap ready for Test! ▶Deco X50/X55_V1.3_1.3.1 Introduced Channel Selection, WiFi Access Control and WireGuard VPN ▶Deco BE65_V2_1.3.0 Added DoH & DoT, Speed Limit and Internet Backup Try to leave a Message if urgent help is required.
Recommended Solution
  0  
  0  
#2
Options
3 Reply
Re:MR100 4G Power Failure-Solution
3 weeks ago - last edited 6 hours ago

  @StillPhone 

Hi, welcome to the community.

Did you use the DC power adapter or the original POE adapter?

There is no Power button on this router. It should automatically boot up after the power outage is restored.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco Wi-Fi Heatmap ready for Test! ▶Deco X50/X55_V1.3_1.3.1 Introduced Channel Selection, WiFi Access Control and WireGuard VPN ▶Deco BE65_V2_1.3.0 Added DoH & DoT, Speed Limit and Internet Backup Try to leave a Message if urgent help is required.
Recommended Solution
  0  
  0  
#2
Options
Re:MR100 4G Power Failure
3 weeks ago
I used the POE option as I didn’t have a DC power adapter. Would you expect it to power back on automatically when the power returns using the POE?
  0  
  0  
#3
Options
Re:MR100 4G Power Failure
6 hours ago

  @StillPhone 

StillPhone wrote

I used the POE option as I didn’t have a DC power adapter. Would you expect it to power back on automatically when the power returns using the POE?

Yes,MR100-outdoor should also be powered on automatically when the POE adapter returns

▶Check What's Currently Going on With Deco ▶Deco Wi-Fi Heatmap ready for Test! ▶Deco X50/X55_V1.3_1.3.1 Introduced Channel Selection, WiFi Access Control and WireGuard VPN ▶Deco BE65_V2_1.3.0 Added DoH & DoT, Speed Limit and Internet Backup Try to leave a Message if urgent help is required.
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 103

Replies: 3

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.