Home Network Community > Deco > Deco X10 / X1500-4g
< Deco

Deco X10 / X1500-4g

Deco X10 / X1500-4g

Deco X10 / X1500-4g
Deco X10 / X1500-4g
a week ago - last edited a week ago
Tags: #Firmware Update
Model: Deco X10-4G  
Hardware Version:
Firmware Version: 1.0.5 Build 20240821 Rel. 41763

I have a Deco X10-4g which I have purchased second hand from a person in Austria. The firmware is 1.0.5 Build 20240821 Rel. 41763 and firmware update through the app shows "no updates". However, different tp-link sites list 1.2.0 as the latest version.

I do understand that different regions may have different firmware and I couldn't find an "Austria" website. Which firmware (and from where) should I download?

File:
20260125_214106.jpgDownload
  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Deco X10 / X1500-4g-Solution
a week ago - last edited a week ago

  @David-TP 

 

Hi David, indeed this was the issue. Once I installed the 1.1.1 version, the Deco identified through the app that there is a newer version (1.2.0) and prompt me to update.

 

I am currently running 1.2.0 for a day (or so) without any issues.

 

Thank you again for your help.

Recommended Solution
  0  
  0  
#5
Options
4 Reply
Re:Deco X10 / X1500-4g
a week ago - last edited a week ago

  @athafoud 

Hi, the latest firmware for Deco X1500-4G is also 1.2.0 Build 20250719 Rel. 64158.

You can download the 1.2.0 firmware for Deco X10-4G here:https://www.tp-link.com/de/support/download/deco-x1500-4g/#Firmware

The bin file also works for Deco X1500-4G_V1.

Best regards.

▶Check What's Currently Going on With Deco ▶Deco Wi-Fi Heatmap ready for Test! ▶Deco X50/X55_V1.3_1.3.1 Introduced Channel Selection, WiFi Access Control and WireGuard VPN ▶Deco BE65_V2_1.3.0 Added DoH & DoT, Speed Limit and Internet Backup Try to leave a Message if urgent help is required.
  0  
  0  
#2
Options
Re:Deco X10 / X1500-4g
a week ago

  @David-TP 

 

Hi David, thanks for the reply. Unfortunately this didn't work. The only step I didn't follow is having to connect with an ethernet cable to my deco, as I do not currently have any device capable.

 

I tried several times, also after rebooting the decos but after the firmware upload I get the following error "Upgrade failed. Please select the latest version of firmware to upgrade."

 

Any suggestions? 

 

 

File:
Screenshot_20260127_173021_Chrome.jpgDownload
  0  
  0  
#3
Options
Re:Deco X10 / X1500-4g
a week ago

  @athafoud 

Hi, thank you very much for the update.

Sorry, I missed one more thing.

The minimum supported firmware version for 1.2.0 is 1.1.1 Build 20241015 Rel. 76741.

So we might need to update Deco X1500-4G to an older 1.1.1 version first, then to 1.2.0 again.

Wait for your reply.

Best regards.

 

▶Check What's Currently Going on With Deco ▶Deco Wi-Fi Heatmap ready for Test! ▶Deco X50/X55_V1.3_1.3.1 Introduced Channel Selection, WiFi Access Control and WireGuard VPN ▶Deco BE65_V2_1.3.0 Added DoH & DoT, Speed Limit and Internet Backup Try to leave a Message if urgent help is required.
  0  
  0  
#4
Options
Re:Deco X10 / X1500-4g-Solution
a week ago - last edited a week ago

  @David-TP 

 

Hi David, indeed this was the issue. Once I installed the 1.1.1 version, the Deco identified through the app that there is a newer version (1.2.0) and prompt me to update.

 

I am currently running 1.2.0 for a day (or so) without any issues.

 

Thank you again for your help.

Recommended Solution
  0  
  0  
#5
Options

Information

Helpful: 0

Views: 2671

Replies: 4

Tags

Firmware Update
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.