NX200 and reversed (?) WPS - Wifi on/off - reset buttons
Hi to all!
I bought last days the NX200 5g modem/router and it works very well except for one problem:
I need the possibility to turn on/off the wifi by button and I red that it should be possible by pressing about 2 seconds the wps button: it not works for me.
I tried all but nothing, also with the firmware Archer NX200(EU)_V2.2_250725
My last attempt was to reset all and I pressed with a clip the "reset" switch (is just nearby the wps button): well by pressing this button the wifi turn on or off (!)
(It could by well, but I need one clip everytime and it's not fine).
Question: it's a firmware issue or it's a hardware problem and I should return my NX200 to the seller?
Thanks and cheers from Italy
Lorenzo
Hi, welcome to the community.
I checked the UG of NX200_V1( the button rules also work for V2 and V2.2):
https://static.tp-link.com/upload/manual/2025/202503/20250324/Archer%20NX200_UG_REV1.0.0.pdf
I think the current reported issue is expected.
Best regards.
@David-TP Hi and thank you a lot for the answer!
I made of course research in the web before to post here but I found answers like this:
or like this:
https://www.tp-link.com/it/document/51091/
I think that's a strange decision to make this differences for the same model (NX200)
Since I would like to have the "easy" possibility to turn on/off the wifi (without the clip) what I can do?
I guess that to install the 3.0 firmware on my V2 version will be a big fail (anyway if possible to try to do it) and when I buy a NX200 router (I'm in Italy) I can't choose (or see in advance) which version it will be...
What is the situation with the other models (like NX210, NX500 or NX600)? Will I have the same "Version's problem" or one model of these has the wps/wifi button who works in the same way in all the versions?
Thank you a lot for the time,
should you come to the Dolomites you will find beer free here :o)
Lorenzo