Home Network Community > Wi-Fi Routers > BE230 v2 reboots frequently after update to 1.3.1 Build 20260106
< Wi-Fi Routers

BE230 v2 reboots frequently after update to 1.3.1 Build 20260106

12

BE230 v2 reboots frequently after update to 1.3.1 Build 20260106

BE230 v2 reboots frequently after update to 1.3.1 Build 20260106
BE230 v2 reboots frequently after update to 1.3.1 Build 20260106
2 weeks ago
Tags: #Network Connectivity #Firmware Update
Model: Archer BE230  
Hardware Version: V2
Firmware Version: 1.3.1 Build 20260106 rel.39388(4555)

Hello,

I am using TP-Link BE230 v2 at home and it was working perfectly fine before I updated it to 1.3.1 Build 20260106 rel.39388(4555) yesterday. 

Now the router restarts frequently (at least 4 times for the last 12 hours, maybe even more). I lose all connection to the router wifi or ethernet, also the LED are turning off and back on again so I am sure it restarts. Also at least one time it restarted and restarted again right after that, it looked like some kind of bootloop.

I have tried to downgrade to 1.1.3 but the router gave me error while trying. 

 

Please do something fast about it because I am trying to work here :)

 

  0      
 
  0      
 
#1
Options
12 Reply
Re:BE230 v2 reboots frequently after update to 1.3.1 Build 20260106
2 weeks ago

Hello @Bohera ,

Welcome to our community.

 

Have you enabled SMB sharing? If so, please turn it off and compare again.

 

Welcome to Our Community！ Check Out the Latest Posts: △New Firmware for Archer BE400 V1 to Support IPv6 VPN, Wake On LAN, and More △New Firmware for Archer BE800 V1 to Support VPN Merge, EasyMesh Guest/IoT Network Extend, and More △Enhanced EasyMesh Support with Extended Guest/IoT/MLO Networking and Advanced Features for BE550 V2 △New Firmware for Archer BE900 V2 to Support Multi-WAN, DoH/DoT, EasyMesh in AP Mode and More If you found the post or response helpful, click Helpful. If an answer solves your problem, click Recommended Solution so that others can benefit from it.
  0  
  0  
#2
Options
Re:BE230 v2 reboots frequently after update to 1.3.1 Build 20260106
2 weeks ago

Hello @Joseph-TP,

Thank you for the fast reply!
Yes it is enabled in the settings as I am using a USB HDD connected to the router. I will turn it off and see if that stops the reboots but I hope that this is some kind of temporal solution as I need this enabled :) I will use the FTP option for now but it is not as convenient for me. I will report back with the results and in the meantime I hope you will release firmware update fix for this soon.

 

  0  
  0  
#3
Options
Re:BE230 v2 reboots frequently after update to 1.3.1 Build 20260106
a week ago

Hello @Bohera ,

 

Is there any update?

 

Bohera wrote

Hello @Joseph-TP,

Thank you for the fast reply!
Yes it is enabled in the settings as I am using a USB HDD connected to the router. I will turn it off and see if that stops the reboots but I hope that this is some kind of temporal solution as I need this enabled :) I will use the FTP option for now but it is not as convenient for me. I will report back with the results and in the meantime I hope you will release firmware update fix for this soon.

 

 

Welcome to Our Community！ Check Out the Latest Posts: △New Firmware for Archer BE400 V1 to Support IPv6 VPN, Wake On LAN, and More △New Firmware for Archer BE800 V1 to Support VPN Merge, EasyMesh Guest/IoT Network Extend, and More △Enhanced EasyMesh Support with Extended Guest/IoT/MLO Networking and Advanced Features for BE550 V2 △New Firmware for Archer BE900 V2 to Support Multi-WAN, DoH/DoT, EasyMesh in AP Mode and More If you found the post or response helpful, click Helpful. If an answer solves your problem, click Recommended Solution so that others can benefit from it.
  0  
  0  
#4
Options
Re:BE230 v2 reboots frequently after update to 1.3.1 Build 20260106
a week ago

Hi @Joseph-TP,
yes, the constant reboots stopped after I turned off the SMB option as you suggested. Everything now works as normal. I hope this will be solved soon with a firmware update so I can again use the SMB option. 
Thanks for the temporal fix!

  0  
  0  
#5
Options
Re:BE230 v2 reboots frequently after update to 1.3.1 Build 20260106
a week ago

Hello @Bohera ,

Thanks for your feedback. 

We have a beta firmware build and will send it to you via email. If possible, please test if the beta firmware helps.

The tech team will likely reach out to you via email to continue troubleshooting. Please check your email inbox and confirm.

Welcome to Our Community！ Check Out the Latest Posts: △New Firmware for Archer BE400 V1 to Support IPv6 VPN, Wake On LAN, and More △New Firmware for Archer BE800 V1 to Support VPN Merge, EasyMesh Guest/IoT Network Extend, and More △Enhanced EasyMesh Support with Extended Guest/IoT/MLO Networking and Advanced Features for BE550 V2 △New Firmware for Archer BE900 V2 to Support Multi-WAN, DoH/DoT, EasyMesh in AP Mode and More If you found the post or response helpful, click Helpful. If an answer solves your problem, click Recommended Solution so that others can benefit from it.
  0  
  0  
#6
Options
Re:BE230 v2 reboots frequently after update to 1.3.1 Build 20260106
a week ago

  @Joseph-TP  hello. I have similar issue. I need smb sharing so pls send me the beta firmware. Thanks.  

  0  
  0  
#7
Options
Re:BE230 v2 reboots frequently after update to 1.3.1 Build 20260106
a week ago

Hello @gabriehoog ,

The tech team has been made aware of your case; they will likely reach out to you via email to continue troubleshooting. Please check your email inbox and confirm.

Welcome to Our Community！ Check Out the Latest Posts: △New Firmware for Archer BE400 V1 to Support IPv6 VPN, Wake On LAN, and More △New Firmware for Archer BE800 V1 to Support VPN Merge, EasyMesh Guest/IoT Network Extend, and More △Enhanced EasyMesh Support with Extended Guest/IoT/MLO Networking and Advanced Features for BE550 V2 △New Firmware for Archer BE900 V2 to Support Multi-WAN, DoH/DoT, EasyMesh in AP Mode and More If you found the post or response helpful, click Helpful. If an answer solves your problem, click Recommended Solution so that others can benefit from it.
  0  
  0  
#8
Options
Re:BE230 v2 reboots frequently after update to 1.3.1 Build 20260106
Thursday

  @Joseph-TP Same problem here.  new frirmware realy sucks!

  0  
  0  
#9
Options
Re:BE230 v2 reboots frequently after update to 1.3.1 Build 20260106
Friday

Hi @Victorre , 

Welcome to our community.

 

The model of your router is also Archer BE230-v2-1.3.1 Build 20260106, right? 

Do you encounter the same anomaly as below? If SMB option disabled can help?

 

In addition, what client devices do you have? Like MacBook.

 

The tech team will likely reach out to you via email to continue troubleshooting. Please check your email inbox and confirm.

Hi @Joseph-TP,
yes, the constant reboots stopped after I turned off the SMB option as you suggested. Everything now works as normal. I hope this will be solved soon with a firmware update so I can again use the SMB option. 
Thanks for the temporal fix!

@gabriehoog , Our Tech team contacted you via TKID260316289 last time and sent you a beta firmware. Have you tried the beta firmware? Is there any progress?

Welcome to Our Community！ Check Out the Latest Posts: △New Firmware for Archer BE400 V1 to Support IPv6 VPN, Wake On LAN, and More △New Firmware for Archer BE800 V1 to Support VPN Merge, EasyMesh Guest/IoT Network Extend, and More △Enhanced EasyMesh Support with Extended Guest/IoT/MLO Networking and Advanced Features for BE550 V2 △New Firmware for Archer BE900 V2 to Support Multi-WAN, DoH/DoT, EasyMesh in AP Mode and More If you found the post or response helpful, click Helpful. If an answer solves your problem, click Recommended Solution so that others can benefit from it.
  0  
  0  
#10
Options
Re:BE230 v2 reboots frequently after update to 1.3.1 Build 20260106
13 hours ago

  @Joseph-TP How does one also get that firmware, please? I have the same issue and can't find a file to revert back the firmware to an earlier version. I've also turned off the same SMB settings as OP.

  0  
  0  
#11
Options
12

Information

Helpful: 0

Views: 488

Replies: 12

Tags

Network Connectivity Firmware Update
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.