Home Network Community > Wi-Fi Routers > Archer BE230 v1.0 drops 2.4 GHz Wifi after some time
< Wi-Fi Routers

Archer BE230 v1.0 drops 2.4 GHz Wifi after some time

Archer BE230 v1.0 drops 2.4 GHz Wifi after some time

Archer BE230 v1.0 drops 2.4 GHz Wifi after some time
Archer BE230 v1.0 drops 2.4 GHz Wifi after some time
Thursday
Tags: #Firmware Update #Wi-Fi 7 #Network Connectivity
Model: Archer BE230  
Hardware Version: V1
Firmware Version: 1.2.5 Build 20260108 rel.68570(4555)

I have noticed that after updating to the latest firmware, 2.4 GHz randomly drops. Now it was dropped after 1 week since last router restart. 5 GHz wifi works fine. 

 

I tried manually changing the 2.4 GHz to less congested channel without luck. Renabling wifi does not help. Full router reboot works.

 

Router WAN is directly connected to the wall and 2.4 GHz wireless devices  are mostly IoT devices. Ethernet throughout on desktop PC is as expected.

  0      
 
  0      
 
#1
Options
2 Reply
Re:Archer BE230 v1.0 drops 2.4 GHz Wifi after some time
Friday - last edited Friday

Hello @NeXusFIN ,

Welcome to our community.

 

Would you mind downgrading the firmware to Archer BE230(EU)_V1_1.2.1 Build 20250804? Please check if it can be resolved. 

Please refer to case 2 of How to upgrade the firmware on the TP-Link Wi-Fi Routers.

 

In addition, the tech team will likely reach out to you via email to continue troubleshooting. Please check your email inbox and confirm.

 

Best Regards.

Welcome to Our Community！ Check Out the Latest Posts: △New Firmware for Archer BE400 V1 to Support IPv6 VPN, Wake On LAN, and More △New Firmware for Archer BE800 V1 to Support VPN Merge, EasyMesh Guest/IoT Network Extend, and More △Enhanced EasyMesh Support with Extended Guest/IoT/MLO Networking and Advanced Features for BE550 V2 △New Firmware for Archer BE900 V2 to Support Multi-WAN, DoH/DoT, EasyMesh in AP Mode and More If you found the post or response helpful, click Helpful. If an answer solves your problem, click Recommended Solution so that others can benefit from it.
  0  
  0  
#2
Options
Re:Archer BE230 v1.0 drops 2.4 GHz Wifi after some time
Yesterday

  @Joseph-TP 

I have now downgraded to 1.2.1 Build 20250804 rel.79639(4555) and I will let it run for a week.

 

An additional debug test I tried before downgrading was disabling Smart Connect, then disabling 5 GHz completely, leaving only 2.4 GHz WIFI active. 2.4 GHz network was visible in the spectrum. It showed up in my phone as well but the connection attempt immediately failed.

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 83

Replies: 2

Tags

Firmware Update Wi-Fi 7 Network Connectivity
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.