I recently upgraded my Deco X50 to v 1.3.1 and here is some issues and things i would like TP Link to check properly with the App. 

First of all DHCP Clients and All Clients connected , i found a issue that if the DHCP Server is starting from 192.168.0.100 to 192.168.0.254 then devices below 100 range does not show properly in Client list , they are all set to DHCP in their config but in Address Reservation they are set to the correct IP. I have semi managed switch TP Link TL-SG1016PE and itseslf does not show in Client List if i had changed my DHCP List starting from 192.168.0.100 and IP assiged via Deco App is 192.168.0.3 . I was unable to add 192.168.0.3 to the Switch automatically, i had to do workaround that set DHCP to 192.168.0.2 first and then do Address Reservation and then Deco accepted 0.3 ip . After switching back to 0.100 it no longer shows in Client List. The whole point of Address Reservation for me is for security and giving IoT Devices specific IP Ranges to keep them all  


Secondly i have issue with my Wireguard Server, i have set my Wireguard Server for both Home Network and Internet but only Home Network is working on my Wireguard Client side and it does not connect to Internet. I did reset of the Wireguard Server , Config and Client config and still no success.