@David-TP I have other TP Link devices also that are not showing on the network , one more TP Link Archer AC1200 device which is for my FTP Server , but all this devices do not have Fix IP on their system , they are set in Address Reservation section of the router which was with workaround with first setting DHCP of the Router to start from 0.2 to 0.254 and i have set the Fix IP in Address Reservation and then i had changed back my DHCP Server to start from 0.100 . Is there any way we can assign the IP starting with LAN IP structure instead of using DHCP information as i would have 0.20 - 0.30 for my IoT Devices , 0.30-0.40 to my CCTV Camera and then for regular daily devices like Mobile i use DHCP . This is not a case with Archer it works perfectly with my Archer devices. There are random times those devices that do not have DHCP Range sometime shows up on Deco App as i had Notification enabled for them for Connect and Disconnect. 

For Wireguard i tried deleting , creating new clients and also i tried modifying my MTU Size and still seems to not connect, it does the handsake and everything but Internet just doesnt work. 

Here is one more feature request i want to ask if its possible with my Deco X50 at the moment . 
I have local ISP running Internet to my Deco X50 and then it connects to my Switch and i have 1 Deco XE75 connected to my living room, I want to add JioAirFiber which will work as a backup connection and also TV Set up box service but from my research Jio TV Setup box only works with Jio Network. Is there any way i can make my Deco XE75 work with both the networks and only TV Box works with Jio Air Fiber network while other clients are on Local ISP ?